Enhance the elongation of quenched Fe-6.5 wt.% Si alloy by adjusting ordered structures and residual stress
Materials Science and Technology · 11.11.2026
DOI: 10.1177/02670836261505211 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 11.11.2026. Verfasst von Xiangju Shi und 5 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
During cooling of Fe-6.5 wt.% Si alloy, the cooling rate affects the ordering process, which in turn influences the plasticity. Rapid quenching from the disordered phase region inhibits ordering and improves plasticity, but introduces residual stress that degrades workability to a certain extent. The microstructure and mechanical properties after stress relief annealing at 300–500°C were studied. Based on ordered structure morphology and resistivity heating curves, the critical ordering temperature was determined to be approximately 400°C. Annealing at 500°C or at 400°C for 20 h increased order degree and reduced elongation. By adjusting ordered structures and residual stress, the relatively appropriate stress relief annealing process is 400°C for 10 h, which further enhances the elongation.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Shi, X., Ye, F., Liu, B., Wang, Z., Wang, Z., & Ding, Z. (2026). Enhance the elongation of quenched Fe-6.5 wt.% Si alloy by adjusting ordered structures and residual stress. Materials Science and Technology. https://doi.org/10.1177/02670836261505211
Vancouver
Shi X, Ye F, Liu B, Wang Z, Wang Z, Ding Z. Enhance the elongation of quenched Fe-6.5 wt.% Si alloy by adjusting ordered structures and residual stress. Materials Science and Technology. 2026. doi:10.1177/02670836261505211
BibTeX
@article{Shi2026,
author = {Shi, Xiangju and Ye, Feng and Liu, Binbin and Wang, Zhen and Wang, Zhengbao and Ding, Zhiyi},
title = {Enhance the elongation of quenched Fe-6.5 wt.% Si alloy by adjusting ordered structures and residual stress},
journal = {Materials Science and Technology},
year = {2026},
doi = {10.1177/02670836261505211}
}
EUVIMED