EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low‐Temperature Photocrystallization of Atomic Layer Deposition‐Processed Tin Oxide for Highly Efficient and Flexible Perovskite Solar Cells

Dayeon Ko, Se Hun Joo, Sol Kim, In Soo Kim iD, Minwoo Park iD

Small Science · 2025-09 · 5 (9)

DOI: 10.1002/smsc.202500196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Science, online erschienen am 07.07.2025. Verfasst von Dayeon Ko und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biological Engineering Sookmyung Women's University Seoul 04310 Korea. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Atomic layer deposition (ALD) enables an excellent surface coverage and uniformity in the preparation of large‐area metal‐oxide thin films. In particular, ALD‐processed SnO 2 has demonstrated great potential as an electron transport layer in flexible perovskite solar cells (PSCs) and tandem modules. However, the poor electrical conductivities and surface wettabilities of amorphous SnO 2 remain critical challenges for commercialization. In this study, a low‐temperature and rapid crystallization process for amorphous SnO 2 is introduced, based on the use of high‐power ultraviolet (UV) exposure (UV‐SnO 2 ) to achieve high‐performance flexible PSCs. The generation of highly dense O 3 /OH radicals under UV exposure effectively ruptures the imperfect and weak bonds in the SnO 2 matrix, thereby facilitating the formation of nanocrystalline SnO 2 . This transformation enhances the conductivity and shifts the energy levels upward, promoting electron injection and transfer from the perovskite. Rigid and flexible devices exhibit remarkable power conversion efficiencies (PCEs) of 22.86 and 21.49%, respectively. Furthermore, the flexible device demonstrates an excellent mechanical durability and environmental stability, retaining 93.3% of its initial PCE after 1500 bending cycles ( r = 12 mm) and 87.4% after 1000 h under 1 sun illumination. These results highlight the potential of photocrystallization for advancing flexible PSC technologies.

Schlagwörter

Stichwörter der Autor:innen

atomic layer depositionflexible perovskite solar cellsphotocrystallizationtin oxidesultraviolet light

Autor:innen und Institutionen

  • Department of Chemical and Biological Engineering Sookmyung Women's University Seoul 04310 Korea.
  • Nanophotonics Research Center Korea Institute of Science and Technology (KIST) Seoul 02792 Korea.
  • KIST-SKKU Carbon-Neutral Research Center Sungkyunkwan University (SKKU) Suwon 16419 Korea.

ORCID-Profile: In Soo Kim, Minwoo Park

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Ko, D., Joo, S. H., Kim, S., Kim, I. S., & Park, M. (2025). Low‐Temperature Photocrystallization of Atomic Layer Deposition‐Processed Tin Oxide for Highly Efficient and Flexible Perovskite Solar Cells. Small Science, 5(9). https://doi.org/10.1002/smsc.202500196

Vancouver

Ko D, Joo SH, Kim S, Kim IS, Park M. Low‐Temperature Photocrystallization of Atomic Layer Deposition‐Processed Tin Oxide for Highly Efficient and Flexible Perovskite Solar Cells. Small Science. 2025;5(9). doi:10.1002/smsc.202500196

BibTeX
@article{Ko2025,
  author = {Ko, Dayeon and Joo, Se Hun and Kim, Sol and Kim, In Soo and Park, Minwoo},
  title = {Low‐Temperature Photocrystallization of Atomic Layer Deposition‐Processed Tin Oxide for Highly Efficient and Flexible Perovskite Solar Cells},
  journal = {Small Science},
  year = {2025},
  volume = {5},
  number = {9},
  doi = {10.1002/smsc.202500196}
}
Kostenlos starten →