EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Zinc Aluminum Oxide Encapsulation Layers for Perovskite Solar Cells Deposited Using Spatial Atomic Layer Deposition

Hatameh Asgarimoghaddam, Qiaoyun Chen, Fan Ye, Ahmed Shahin, Bo Song, Kevin P Musselman iD

Small Methods · 2024-03 · 8 (3)

DOI: 10.1002/smtd.202300995 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 23.11.2023. Verfasst von Hatameh Asgarimoghaddam und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, N2L 3G1, Canada. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ontario Ministry for Research, Innovation, and Science Low Carbon Innovation Fund, NSERC Discovery Program, Ontario Research Fund - Research Infrastructure.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An atmospheric‐pressure spatial atomic layer deposition system is used to rapidly deposit 60 nm zinc–aluminum oxide (Zn–AlO x ) thin‐film‐encapsulation layers directly on perovskite solar cells at 130 °C without damaging the temperature‐sensitive perovskite and organic materials. Varying the Zn/Al ratio has a significant impact on the structural properties of the films and their moisture barrier performance. The Zn–AlO x films have higher refractive indexes, lower concentrations of OH─ groups, and lower water–vapor transmission rates (WVTR) than AlO x films without zinc. However, as the Zn/Al ratio increases beyond 0.21, excess Zn atoms segregate, leading to an increase in the number of available hydroxyl groups on the surface of the deposited film and a slight increase in the WVTR. The stability of the p–i–n formamidinium methylammonium lead iodide solar cells under standard ISOS‐D‐3 testing conditions (65 °C and 85% relative humidity) is significantly enhanced by the thin encapsulation layers. The layers with a Zn/Al ratio of 0.21 result in a seven‐fold increase the time required for the cells to degrade to 80% of their original efficiency.

Schlagwörter

Stichwörter der Autor:innen

alumina (Al2O3)atmospheric-pressure spatial atomic layer deposition (AP-SALD)perovskite solar cells (PSCs)thin-film encapsulation (TFE)zinc aluminum oxide (Zn-AlOx)

Autor:innen und Institutionen

  • Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, N2L 3G1, Canada.
  • Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, N2L 3G1, Canada.
  • Laboratory of Advanced Optoelectronic Materials, Suzhou Key Laboratory of Novel Semiconductor Materials and Devices, Suzhou Key Laboratory of Macromolecular Design and Precision Synthesis, College of Chemistry, Chemical…

ORCID-Profile: Kevin P Musselman

Förderung

  • Ontario Ministry for Research, Innovation, and Science Low Carbon Innovation Fund
  • NSERC Discovery Program
  • Ontario Research Fund - Research Infrastructure
  • NSERC Research Tools and Instruments Program

Zitieren

APA

Asgarimoghaddam, H., Chen, Q., Ye, F., Shahin, A., Song, B., & Musselman, K. P. (2024). Zinc Aluminum Oxide Encapsulation Layers for Perovskite Solar Cells Deposited Using Spatial Atomic Layer Deposition. Small Methods, 8(3). https://doi.org/10.1002/smtd.202300995

Vancouver

Asgarimoghaddam H, Chen Q, Ye F, Shahin A, Song B, Musselman KP. Zinc Aluminum Oxide Encapsulation Layers for Perovskite Solar Cells Deposited Using Spatial Atomic Layer Deposition. Small Methods. 2024;8(3). doi:10.1002/smtd.202300995

BibTeX
@article{Asgarimoghaddam2024,
  author = {Asgarimoghaddam, Hatameh and Chen, Qiaoyun and Ye, Fan and Shahin, Ahmed and Song, Bo and Musselman, Kevin P},
  title = {Zinc Aluminum Oxide Encapsulation Layers for Perovskite Solar Cells Deposited Using Spatial Atomic Layer Deposition},
  journal = {Small Methods},
  year = {2024},
  volume = {8},
  number = {3},
  doi = {10.1002/smtd.202300995}
}
Kostenlos starten →