Fullerene‐Free p–i–n Perovskite Solar Cells: Direct Deposition of Tin Oxide on Perovskite Layer Using Ligand Bridges
Advanced Energy Materials · 2024-12 · 14 (48)
DOI: 10.1002/aenm.202402433 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 12.10.2024. Verfasst von Sung Yong Kim und 13 weiteren Autor:innen. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea, Korea Institute of Energy Technology Evaluation and Planning, Ministry of Trade, Industry and Energy.
Abstract (Originalsprache)
In p–i–n perovskite solar cells (PSCs), fullerene derivatives are predominantly used as an electron transport material (ETM) despite their disadvantages, such as parasitic absorption in the short wavelength range and high cost. State‐of‐the‐art n‐i‐p PSCs are fabricated using SnO 2 as the ETM due to their high charge transfer ability, transparency, and low cost. However, in p–i–n PSCs, dispersing SnO 2 nanoparticles in a solvent that does not damage the perovskite and forming a uniform layer is challenging. Herein, a strategy of directly depositing SnO 2 quantum dots (QDs) on perovskite using ethylenediamine (EDA) for high‐performance applications is reported, which involves a SnO 2 QD solution designed with a damage‐free cosolvent. Treating the SnO 2 QD layer with the EDA strategy creates a conformal SnO 2 QD layer and improves charge transport. This strategy achieves a high power conversion efficiency (PCE) of 18.9% in PSCs with a 1.77 eV bandgap, which is the highest PCE reported for wide bandgap p–i–n PSCs using an inorganic ETM. The top SnO 2 layer enables ITO deposition without sputtering damage and achieves a bifacial factor of 99% due to the high transmittance of SnO 2 QD. The resulting four‐terminal all‐perovskite tandem exhibited a PCE of 27.0%.
Förderung
- National Research Foundation of Korea
- Korea Institute of Energy Technology Evaluation and Planning
- Ministry of Trade, Industry and Energy
Zitieren
APA
Kim, S. Y., Woo, M. Y., Jeong, M. J., Jeon, S. W., Ahn, J. W., Park, J. H., Kim, C. Y., Kim, D. H., Oh, O. J., Yu, G., Lee, S., Kim, C., Kim, D. H., & Noh, J. H. (2024). Fullerene‐Free p–i–n Perovskite Solar Cells: Direct Deposition of Tin Oxide on Perovskite Layer Using Ligand Bridges. Advanced Energy Materials, 14(48). https://doi.org/10.1002/aenm.202402433
Vancouver
Kim SY, Woo MY, Jeong MJ, Jeon SW, Ahn JW, Park JH, et al. Fullerene‐Free p–i–n Perovskite Solar Cells: Direct Deposition of Tin Oxide on Perovskite Layer Using Ligand Bridges. Advanced Energy Materials. 2024;14(48). doi:10.1002/aenm.202402433
BibTeX
@article{Kim2024,
author = {Kim, Sung Yong and Woo, Mun Young and Jeong, Min Ju and Jeon, Soo Woong and Ahn, Jae Won and Park, Jeong Hyeon and Kim, Chan Young and Kim, Dong Hyun and Oh, Oui Jin and Yu, Giseon and Lee, Sangheon and Kim, Changyong and Kim, Dong Hoe and Noh, Jun Hong},
title = {Fullerene‐Free p–i–n Perovskite Solar Cells: Direct Deposition of Tin Oxide on Perovskite Layer Using Ligand Bridges},
journal = {Advanced Energy Materials},
year = {2024},
volume = {14},
number = {48},
doi = {10.1002/aenm.202402433}
}
EUVIMED