EUVIMEDEUVIMED entdecken
Crossref

Ionic Conductive Binder for High Volumetric Energy Density Lithium‐Sulfur Batteries

Ruining Jiang, Xiaoyu Jin, Yan Li, Xiaoqun Qi, Han Zhou, Renyuan Zhang iD, Long Qie iD

Small · 2026-06 · 22 (33)

DOI: 10.1002/smll.73546 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 26.04.2026. Verfasst von Ruining Jiang und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Material Processing and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science an…. Die Arbeit nennt 34 Literaturangaben. Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous sulfur cathodes in lithium‐sulfur batteries (LSBs) enhance sulfur utilization but reduce volumetric energy density (VED), while compact cathodes improve VED at the cost of utilization and electrochemical kinetics. To address these limitations, we prepared an ionic conductive binder (PSL) by adding lithium bis(trifluoromethanesulfonyl)imide as a charge carrier to the PVDF and adding succinonitrile to reduce the crystallinity of PVDF. As a result, the PSL cathode demonstrated improved reaction kinetics and sulfur utilization compared with the PVDF cathode. Notably, the PSL cathode achieves a higher volumetric capacity of 608.0 Ah L −1 , which is 12 times that of the PVDF cathode (51.6 Ah L −1 ). Furthermore, a low‐porosity (26.0%) PSL cathode enables a pouch cell to deliver a VED of 827.8 Wh L −1 (including packaging) with a total capacity of 1.3‐Ah. This strategy provides initial design insights relevant to the development of high‐energy‐density LSBs.

Schlagwörter

Stichwörter der Autor:innen

bindercompact sulfur cathodelithium‐sulfur batteryvolumetric energy density

Autor:innen und Institutionen

  • State Key Laboratory of Material Processing and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, China.
  • Institute of New Energy For Vehicles, Shanghai Key Laboratory For Development and Application of Metallic Functional Materials, School of Materials Science and Engineering, Tongji University, Shanghai, China.

ORCID-Profile: Renyuan Zhang, Long Qie

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • National Key Research and Development Program of China

Zitieren

APA

Jiang, R., Jin, X., Li, Y., Qi, X., Zhou, H., Zhang, R., & Qie, L. (2026). Ionic Conductive Binder for High Volumetric Energy Density Lithium‐Sulfur Batteries. Small, 22(33). https://doi.org/10.1002/smll.73546

Vancouver

Jiang R, Jin X, Li Y, Qi X, Zhou H, Zhang R, et al. Ionic Conductive Binder for High Volumetric Energy Density Lithium‐Sulfur Batteries. Small. 2026;22(33). doi:10.1002/smll.73546

BibTeX
@article{Jiang2026,
  author = {Jiang, Ruining and Jin, Xiaoyu and Li, Yan and Qi, Xiaoqun and Zhou, Han and Zhang, Renyuan and Qie, Long},
  title = {Ionic Conductive Binder for High Volumetric Energy Density Lithium‐Sulfur Batteries},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {33},
  doi = {10.1002/smll.73546}
}
Kostenlos starten →