Ionically Conductive Elastic Polymer Binder for Ultrahigh Loading Electrode in High‐Energy‐Density Lithium Batteries
Advanced Materials · 2025-10 · 37 (42)
DOI: 10.1002/adma.202506266 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 07.07.2025. Verfasst von Dong-Yeob Han und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Science and ICT, Ministry of Science and ICT, South Korea.
Abstract (Originalsprache)
Despite the increasing demand for high‐energy‐density lithium batteries, the development of high‐mass‐loading electrodes remains challenged by structural instability and poor charge transfer. Herein, an ionically conductive elastic polymer (ICEP) binder, designed to enable the fabrication of ultrahigh mass‐loading Ni‐rich layered cathodes (LiNi 0.8 Co 0.1 Mn 0.1 O 2 , NCM811), is introduced. The ICEP binder integrates mechanical elasticity, strong adhesion, and ionic conductivity through diverse functional groups, addressing challenges in high‐mass‐loading electrode fabrication. Hydrogen bonding between the ICEP binder and NCM811 particles ensures uniform electrode morphology, forming a stable cathode–electrolyte interphase (CEI). This stable interface mitigates surface side reactions, suppresses phase transitions in NCM811, and improves long‐term electrochemical stability. Additionally, the ICEP binder enhances Li‐ion diffusivity, reduces interphase resistance, and promotes faster electrochemical kinetics, while preventing solvent‐drying‐induced cracking. As a result, high‐mass‐loading electrodes (62.4 mg cm⁻ 2 , 12.5 mAh cm⁻ 2 ) are successfully fabricated with the ICEP binder and demonstrate 94.6% capacity retention. Furthermore, a double‐stacked pouch‐type lithium metal full cell incorporating ICEP‐based cathodes achieves energy densities of 377.6 Wh kg cell ⁻ 1 and 1016.8 Wh L cell ⁻ 1 (including package materials), setting new benchmarks for lithium metal batteries. These findings establish ICEP as a highly effective binder for next‐generation high‐energy‐density batteries, offering a scalable and commercially viable solution for ultrahigh‐loading cathodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- Department of Biomedical Engineering, College of Life Science and Biotechnology, Dongguk University, Seoul, 04620, Republic of Korea.
- Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- Department of Materials Engineering and Convergence Technology, Gyeongsang National University (GNU), 501 Jinju-Daero, Jinju, 52828, Republic of Korea.
- School of Materials Science and Engineering, Department of Materials Engineering and Convergence Technology, Gyeongsang National University (GNU), 501 Jinju-Daero, Jinju, 52828, Republic of Korea.
ORCID-Profile: Masud, Soojin Park
Förderung
- National Research Foundation of Korea
- Ministry of Science and ICT
- Ministry of Science and ICT, South Korea
Zitieren
APA
Han, D. Y., Masud, Kim, Y., Kim, S., Lee, D. G., No, J., Choi, H. C., Lee, T. K., Kim, Y. S., & Park, S. (2025). Ionically Conductive Elastic Polymer Binder for Ultrahigh Loading Electrode in High‐Energy‐Density Lithium Batteries. Advanced Materials, 37(42). https://doi.org/10.1002/adma.202506266
Vancouver
Han DY, Masud, Kim Y, Kim S, Lee DG, No J, et al. Ionically Conductive Elastic Polymer Binder for Ultrahigh Loading Electrode in High‐Energy‐Density Lithium Batteries. Advanced Materials. 2025;37(42). doi:10.1002/adma.202506266
BibTeX
@article{Han2025,
author = {Han, Dong-Yeob and Masud and Kim, Yeongseok and Kim, Saehyun and Lee, Dong Gyu and No, Junhyeok and Choi, Hee Cheul and Lee, Tae Kyung and Kim, Youn Soo and Park, Soojin},
title = {Ionically Conductive Elastic Polymer Binder for Ultrahigh Loading Electrode in High‐Energy‐Density Lithium Batteries},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {42},
doi = {10.1002/adma.202506266}
}
EUVIMED