A Low‐Dosage Flame‐Retardant Inorganic Polymer Binder for High‐Energy‐Density and High‐Safety Lithium‐Sulfur Batteries
Advanced Energy Materials · 2024-09 · 14 (34)
DOI: 10.1002/aenm.202401568 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 08.06.2024. Verfasst von Zhuzuan Chen und 9 weiteren Autor:innen. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Science and Technology Planning Project of Guangdong Province, Shenzhen Science and Technology Innovation Program.
Abstract (Originalsprache)
The developing electric vehicles and portable electronics urgently require rechargeable lithium batteries with high energy density and high safety. Lithium‐sulfur (Li‐S) batteries have shown significant advantages in their high energy density. However, the use of traditional polymer binders faces significant challenges, such as soluble polysulfides, large volume changes, and electrode flammability, resulting in performance degradation and safety hazards. Here, a polymeric aluminophosphate (AP) is for the first time proposed as an inorganic polymer binder to simultaneously realize high energy density, long cycling stability, and reliable safety of Li‐S batteries. Benefiting from the synergistic effect of polar P‐O and Al‐O chain segments, the AP binder provides strong mechanical adhesion, anchors polysulfides, and promotes the redox kinetics of sulfur electrodes. The AP binder also ensures high flame retardancy for sulfur electrodes at an extremely low dosage of 2 wt%. Consequently, the retardant sulfur electrode can be operated stably with high specific capacities (1190 mAh g −1 ), high capacity retention rates (>99.1%) during 500 cycles, and excellent rate capability (3 C). Based on the entire cell, the soft‐packaged Li‐S full battery provides high capacities (3.6 mAh cm −2 ), high cell energy density (415 Wh kg −1 and 297 Wh L −1 ), and high capacity retention rates (>99.8%).
Förderung
- National Natural Science Foundation of China
- Science and Technology Planning Project of Guangdong Province
- Shenzhen Science and Technology Innovation Program
Zitieren
APA
Chen, Z., Chen, T., Wang, J., Li, P., Liu, J., Chen, W., Yang, Z., Deng, Y., Chang, J., & Yang, Y. (2024). A Low‐Dosage Flame‐Retardant Inorganic Polymer Binder for High‐Energy‐Density and High‐Safety Lithium‐Sulfur Batteries. Advanced Energy Materials, 14(34). https://doi.org/10.1002/aenm.202401568
Vancouver
Chen Z, Chen T, Wang J, Li P, Liu J, Chen W, et al. A Low‐Dosage Flame‐Retardant Inorganic Polymer Binder for High‐Energy‐Density and High‐Safety Lithium‐Sulfur Batteries. Advanced Energy Materials. 2024;14(34). doi:10.1002/aenm.202401568
BibTeX
@article{Chen2024,
author = {Chen, Zhuzuan and Chen, Tingjie and Wang, Junwen and Li, Pengxian and Liu, Ju and Chen, Wenyan and Yang, Zhuohong and Deng, Yonghong and Chang, Jian and Yang, Yu},
title = {A Low‐Dosage Flame‐Retardant Inorganic Polymer Binder for High‐Energy‐Density and High‐Safety Lithium‐Sulfur Batteries},
journal = {Advanced Energy Materials},
year = {2024},
volume = {14},
number = {34},
doi = {10.1002/aenm.202401568}
}
EUVIMED