A Dual‐Mode On‐Chip 3D‐Printed Nanoengineered Platform for Extraction and Electrochemical Detection of Enrofloxacin
Small · 2025-08 · 21 (33)
DOI: 10.1002/smll.202502880 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 27.06.2025. Verfasst von Supratim Mahapatra und 3 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Bio-physio Sensors and Nanobioengineering, School of Biochemical Engineering, Indian Institute of Technology (BHU) Varanasi, Varanasi, …. Hauptthemen laut MEDLINE: Enrofloxacin, Printing, Three-Dimensional, Electrochemical Techniques, Nanotechnology. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 61 Literaturangaben.
Abstract (Originalsprache)
A magnetic molecularly imprinted polymer (MMIP) is synthesized for the development of a highly selective and sensitive electrochemical sensing platform targeting enrofloxacin (ENF). The micro‐sized mesoporous core‐shell MMIP structure is constructed with a magnetite core and an outer shell functionalized using 3‐aminopropyltriethoxysilane (APTES) as the monomer. The synthesis is optimized and validated using a range of physical and electrochemical techniques. The sensor is designed with dual‐mode functionality, integrating magnetic separation for efficient target extraction and electrochemical detection for precise quantification. A conventional electrode is modulated with multi‐layer nano‐functionalization to improve its analytical performance, while 3D‐printed components ensure miniaturization, fabrication precision, and scalability. The resulting device exhibits a broad linear detection range from 100 pM to 10 mM (10 −10 to 10 −2 M), with an exceptionally low limit of detection (LOD) of 161 fM (1.61 × 10 −13 M). As ENF is recurrently administered to cattle, milk is used as a real sample to demonstrate the sensor's proof‐of‐application. Real sample analysis showed a high recovery rate (90.23% to 97.29%) with minimal matrix interference, confirming reliability in complex biological matrices. The platform demonstrates exceptional reproducibility and stability, offering a robust and scalable solution for environmental and food safety monitoring.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Laboratory of Bio-physio Sensors and Nanobioengineering, School of Biochemical Engineering, Indian Institute of Technology (BHU) Varanasi, Varanasi, Uttar Pradesh, 221005, India.
ORCID-Profile: Supratim Mahapatra, Ankur Singh, Pranjal Chandra
Zitieren
APA
Mahapatra, S., Singh, A., Paul, R., & Chandra, P. (2025). A Dual‐Mode On‐Chip 3D‐Printed Nanoengineered Platform for Extraction and Electrochemical Detection of Enrofloxacin. Small, 21(33). https://doi.org/10.1002/smll.202502880
Vancouver
Mahapatra S, Singh A, Paul R, Chandra P. A Dual‐Mode On‐Chip 3D‐Printed Nanoengineered Platform for Extraction and Electrochemical Detection of Enrofloxacin. Small. 2025;21(33). doi:10.1002/smll.202502880
BibTeX
@article{Mahapatra2025,
author = {Mahapatra, Supratim and Singh, Ankur and Paul, Ratul and Chandra, Pranjal},
title = {A Dual‐Mode On‐Chip 3D‐Printed Nanoengineered Platform for Extraction and Electrochemical Detection of Enrofloxacin},
journal = {Small},
year = {2025},
volume = {21},
number = {33},
doi = {10.1002/smll.202502880}
}
EUVIMED