3D‐Printed Thermoplastic Polyurethane Electrodes for Customizable, Flexible Lithium‐Ion Batteries with an Ultra‐Long Lifetime
Small · 2023-08 · 19 (34)
DOI: 10.1002/smll.202301604 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 24.04.2023. Verfasst von Xin Hu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Frontier Materials, Deakin University, 75 Pigdons Road, Waurn Ponds, Victoria, 3216, Australia. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: ARC Research Hub for Safe and Reliable Energy.
Abstract (Originalsprache)
3D printing technology has demonstrated great potential in fabricating flexible and customizable high‐performance batteries, which are highly desired in the forthcoming intelligent and ubiquitous energy era. However, a significant performance gap, especially in cycling stability, still exists between the 3D‐printed and conventional electrodes, seriously limiting the practical applications of 3D‐printed batteries. Here, for the first time, a series of thermoplastic polyurethane (TPU)‐based 3D‐printed electrodes is developed via fused deposition modeling for flexible and customizable high‐performance lithium‐ion batteries. The TPU‐based electrode filaments in kilogram order are prepared via a facile extrusion method. As a result, the electrodes are well‐printed with high dimensional accuracy, flexibility, and mechanical stability. Notably, 3D‐printed TPU‐LFP electrodes exhibit a capacity retention of 100% after 300 cycles at 1C, which is among the best cycling performance of all the reported 3D‐printed electrodes. Such excellent performance is associated with the superb stress cushioning properties of the TPU‐based electrodes that can accommodate the volume change during the cycling and thus significantly prevent the collapse of 3D‐printed electrode structures. The findings not only provide a new avenue to achieve customizable and flexible batteries but also guide a promising way to erase the performance gap between 3D‐printed and conventional lithium‐ion batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Frontier Materials, Deakin University, 75 Pigdons Road, Waurn Ponds, Victoria, 3216, Australia.
- School of Engineering, Deakin University, 75 Pigdons Road, Waurn Ponds, Victoria, 3216, Australia.
ORCID-Profile: Baozhi Yu
Förderung
- ARC Research Hub for Safe and Reliable Energy
Zitieren
APA
Hu, X., Chen, Y., Xu, W., Zhu, Y., Kim, D., Fan, Y., Yu, B., & Chen, Y. (2023). 3D‐Printed Thermoplastic Polyurethane Electrodes for Customizable, Flexible Lithium‐Ion Batteries with an Ultra‐Long Lifetime. Small, 19(34). https://doi.org/10.1002/smll.202301604
Vancouver
Hu X, Chen Y, Xu W, Zhu Y, Kim D, Fan Y, et al. 3D‐Printed Thermoplastic Polyurethane Electrodes for Customizable, Flexible Lithium‐Ion Batteries with an Ultra‐Long Lifetime. Small. 2023;19(34). doi:10.1002/smll.202301604
BibTeX
@article{Hu2023,
author = {Hu, Xin and Chen, Yimin and Xu, Wei and Zhu, Yi and Kim, Donggun and Fan, Ye and Yu, Baozhi and Chen, Ying},
title = {3D‐Printed Thermoplastic Polyurethane Electrodes for Customizable, Flexible Lithium‐Ion Batteries with an Ultra‐Long Lifetime},
journal = {Small},
year = {2023},
volume = {19},
number = {34},
doi = {10.1002/smll.202301604}
}
EUVIMED