EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques

Alexander A Pavlovskii iD, Konstantin Pushnitsa iD, Alexandra Kosenko iD, Pavel Novikov iD, Anatoliy A Popovich iD

Materials · 02.12.2024 · 17 (23) · 5904

DOI: 10.3390/ma17235904 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 02.12.2024. Verfasst von Alexander A Pavlovskii und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Machinery, Materials and Transport, Peter the Great Saint Petersburg Polytechnic University, Politechnicheskaya ul. 29, 195251 Saint Pet…. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 132 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agreement on the grant in the form of subsidies from the federal budget for the implementation of state support for the creation and development of world-class…, Ministry of Science and Higher Education of the Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, 3D printing has emerged as a promising technology in energy storage, particularly for the fabrication of Li-ion battery electrodes. This innovative manufacturing method offers significant material composition and electrode structure flexibility, enabling more complex and efficient designs. While traditional Li-ion battery fabrication methods are well-established, 3D printing opens up new possibilities for enhancing battery performance by allowing for tailored geometries, efficient material usage, and integrating multifunctional components. This article examines three key 3D printing methods for fabricating Li-ion battery electrodes: (1) material extrusion (ME), which encompasses two subcategories—fused deposition modeling (FDM), also referred to as fused filament fabrication (FFF), and direct ink writing (DIW); (2) material jetting (MJ), including inkjet printing (IJP) and aerosol jet printing (AJP) methods; and (3) vat photopolymerization (VAT-P), which includes the stereolithographic apparatus (SLA) subcategory. These methods have been applied in fabricating substrates, thin-film electrodes, and electrolytes for half-cell and full-cell Li-ion batteries. This discussion focuses on their strengths, limitations, and potential advancements for energy storage applications.

Schlagwörter

Stichwörter der Autor:innen

3D printing3D-printed batteriesinkjet printinglithium-ion batteries

Autor:innen und Institutionen

  • Institute of Machinery, Materials and Transport, Peter the Great Saint Petersburg Polytechnic University, Politechnicheskaya ul. 29, 195251 Saint Petersburg, Russia.

ORCID-Profile: Alexander A Pavlovskii, Konstantin Pushnitsa, Alexandra Kosenko, Pavel Novikov, Anatoliy A Popovich

Förderung

  • Agreement on the grant in the form of subsidies from the federal budget for the implementation of state support for the creation and development of world-class…
  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Pavlovskii, A. A., Pushnitsa, K., Kosenko, A., Novikov, P., & Popovich, A. A. (2024). 3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques. Materials, 17(23), 5904. https://doi.org/10.3390/ma17235904

Vancouver

Pavlovskii AA, Pushnitsa K, Kosenko A, Novikov P, Popovich AA. 3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques. Materials. 2024;17(23):5904. doi:10.3390/ma17235904

BibTeX
@article{Pavlovskii2024,
  author = {Pavlovskii, Alexander A and Pushnitsa, Konstantin and Kosenko, Alexandra and Novikov, Pavel and Popovich, Anatoliy A},
  title = {3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {5904},
  doi = {10.3390/ma17235904}
}
Kostenlos starten →