EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

From Plasma Chemistry to Adhesion Strength: Mechanical Characterization of Pure Versus Mixed Aminosilane Films for Bonding Polyurea to Aluminum

Thomas D. Michl, Alain Schwegler, Katerina Zvolska, Michael Grob, Philippe Keller, Raphael Schaller, Heiko Jung, Marcel Fischer, Philipp Frei, Erik Roos, Klaus Kresser, Yaser Hamedi and 2 more

Plasma Processes and Polymers · 2026-06 · 23 (6)

DOI: 10.1002/ppap.70191 ↗

At a glance

Journal article in Plasma Processes and Polymers, published online on 2026-06-09. Written by Thomas D. Michl and 13 co-authors. Cited 2 times so far (Crossref); 71 references. The full text is freely available (open access, CC BY 4.0). Funded by: Innosuisse - Schweizerische Agentur für Innovationsförderung.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Reliably bonding fast‐curing polyurea adhesives (PUA) to aluminum requires replacing wet primers with dry, in‐line solutions. This study investigated atmospheric pressure plasma jet (APPJ) coatings using (3‐aminopropyl)triethoxysilane (APTES). Contrary to expectations, plasma co‐polymerization of APTES with functional co‐monomers reduced adhesion. Instead, pure plasma‐polymerized APTES films (APTESpp) proved superior, quadrupling lap‐shear strength on Al‐6063 from ~2.7 to ~11.2 MPa. Chemical derivatization XPS revealed a “threshold effect”: once sufficient amines exist for covalent coupling, adhesion depends on the interphase's cross‐linking and anchoring rather than maximized nitrogen content. Simple APTESpp deposition using air as the process gas emerges as a robust industrial primer, validated by an 8‐h continuous stress test.

Funding

  • Innosuisse - Schweizerische Agentur für Innovationsförderung

Cite

APA

Michl, T. D., Schwegler, A., Zvolska, K., Grob, M., Keller, P., Schaller, R., Jung, H., Fischer, M., Frei, P., Roos, E., Kresser, K., Hamedi, Y., Salem, D. B., & Neuhaus, S. (2026). From Plasma Chemistry to Adhesion Strength: Mechanical Characterization of Pure Versus Mixed Aminosilane Films for Bonding Polyurea to Aluminum. Plasma Processes and Polymers, 23(6). https://doi.org/10.1002/ppap.70191

Vancouver

Michl TD, Schwegler A, Zvolska K, Grob M, Keller P, Schaller R, et al. From Plasma Chemistry to Adhesion Strength: Mechanical Characterization of Pure Versus Mixed Aminosilane Films for Bonding Polyurea to Aluminum. Plasma Processes and Polymers. 2026;23(6). doi:10.1002/ppap.70191

BibTeX
@article{Michl2026,
  author = {Michl, Thomas D. and Schwegler, Alain and Zvolska, Katerina and Grob, Michael and Keller, Philippe and Schaller, Raphael and Jung, Heiko and Fischer, Marcel and Frei, Philipp and Roos, Erik and Kresser, Klaus and Hamedi, Yaser and Salem, Dhia Ben and Neuhaus, Sonja},
  title = {From Plasma Chemistry to Adhesion Strength: Mechanical Characterization of Pure Versus Mixed Aminosilane Films for Bonding Polyurea to Aluminum},
  journal = {Plasma Processes and Polymers},
  year = {2026},
  volume = {23},
  number = {6},
  doi = {10.1002/ppap.70191}
}
Start for free →