EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Treatments for Enhancing the Bonding Strength of Aluminum Alloy Joints

Juncheng Luo, Jianhua Liu, Huanxiong Xia iD, Xiaohui Ao, Haojie Yin, Lei Guo

Materials · 18.08.2023 · 16 (16) · 5674

DOI: 10.3390/ma16165674 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.08.2023. Verfasst von Juncheng Luo und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Foundation Enhancement Program, Major Fundamental Research of Equipment.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum alloy adhesive bonding joint widely appears in many industrial products. Improving the mechanical performances of aluminum alloy bonding joints has been attracting much effort. To acquire more excellent bonding strength, this paper focused on the effects of different surface treatments, including laser ablation and milling superposed by phosphoric acid anodizing (PAA). The treated surfaces were characterized by roughness and contact angle, and the effects of the geometric parameters of microstructures on wettability, failure mode, and shear strength were examined. The results indicate that those surfaces where the spacing is smaller than the diameter present a hydrophilic property and the corresponding specimens are mainly subject to cohesive failure, and vice versa. Additionally, laser ablation with a properly designed dimple pattern can greatly improve the bonding strength, and the maximum average shear strength of specimens with a thickness of 50 μm reaches 32.82 MPa, which is an increase of 28.15% compared with the original milling specimen. Moreover, fabricating groove or grid patterns on the surfaces and applying PAA treatment can also significantly enhance the bonding strength, reaching up to 36.28 MPa.

Schlagwörter

Stichwörter der Autor:innen

bonding strengthlaser ablationmicrostructurephosphoric acid anodizingsurface treatment

Autor:innen und Institutionen

  • School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China.
  • Tangshan Research Institute, Beijing Institute of Technology, Tangshan 063015, China.
  • Air Force Medical Center, PLA, Beijing 100142, China.

ORCID-Profile: Huanxiong Xia

Förderung

  • National Key Research and Development Program of China
  • Foundation Enhancement Program
  • Major Fundamental Research of Equipment
  • National Fundamental Scientific Research
  • SAST Foundation of CASC

Zitieren

APA

Luo, J., Liu, J., Xia, H., Ao, X., Yin, H., & Guo, L. (2023). Surface Treatments for Enhancing the Bonding Strength of Aluminum Alloy Joints. Materials, 16(16), 5674. https://doi.org/10.3390/ma16165674

Vancouver

Luo J, Liu J, Xia H, Ao X, Yin H, Guo L. Surface Treatments for Enhancing the Bonding Strength of Aluminum Alloy Joints. Materials. 2023;16(16):5674. doi:10.3390/ma16165674

BibTeX
@article{Luo2023,
  author = {Luo, Juncheng and Liu, Jianhua and Xia, Huanxiong and Ao, Xiaohui and Yin, Haojie and Guo, Lei},
  title = {Surface Treatments for Enhancing the Bonding Strength of Aluminum Alloy Joints},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {16},
  pages = {5674},
  doi = {10.3390/ma16165674}
}
Kostenlos starten →