EUVIMEDEUVIMED entdecken
Crossref

Field‐Dependent Rheology of 4D ‐Printed Magnetorheological Elastomers Fabricated Using Fused Filament Fabrication

Khairul Anwar Abdul Kadir, Saiful Amri Mazlan, Shahir Yasin Mohd Yusuf, Abdul Yasser Abd Fatah, Mohd Aidy Faizal Johari, Nur Azmah Nordin, Irfan Bahiuddin, Weihua Li, Ahmad Fitri Sukarman

Polymer Engineering & Science · 2026-05 · 66 (5) · 3457-3465

DOI: 10.1002/pen.70437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 24.02.2026. Verfasst von Khairul Anwar Abdul Kadir und 8 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: Ministry of Higher Education, Malaysia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent advances in additive manufacturing have enabled magnetorheological elastomers to be processed beyond conventional casting routes, allowing their field‐dependent behavior to be explored in printed architectures fabricated via fused filament fabrication (FFF). Traditional fabrication methods such as casting are limited by simple geometries, high mold costs, and post‐processing steps. Additive manufacturing, especially FFF, offers improved design flexibility and customization. This study introduces a novel MRE filament designed for 4D printing, enabling the production of complex, adaptive structures with controlled magnetic behavior. Despite growing interest in MRE, the rheological behavior of 4D‐printed MRE under off‐ and on‐state conditions remains underexplored. This work investigates the impact of an external magnetic field on the viscoelastic properties of FFF‐printed MRE. Results show that adding carbonyl iron particles (CIP) increases the storage modulus by up to 83%, enhancing stiffness and elasticity. Magnetic fields further boost these properties through dipole–dipole interactions. Surface roughness analysis characterizes the filament quality and its potential implications for mechanical and magnetic properties. The successful integration of MRE filaments into FFF‐based 4D printing demonstrates a feasible and scalable route for producing tunable smart materials relevant to emerging autonomous vehicle systems.

Förderung

  • Ministry of Higher Education, Malaysia

Zitieren

APA

Kadir, K. A. A., Mazlan, S. A., Yusuf, S. Y. M., Fatah, A. Y. A., Johari, M. A. F., Nordin, N. A., Bahiuddin, I., Li, W., & Sukarman, A. F. (2026). Field‐Dependent Rheology of 4D ‐Printed Magnetorheological Elastomers Fabricated Using Fused Filament Fabrication. Polymer Engineering & Science, 66(5), 3457-3465. https://doi.org/10.1002/pen.70437

Vancouver

Kadir KAA, Mazlan SA, Yusuf SYM, Fatah AYA, Johari MAF, Nordin NA, et al. Field‐Dependent Rheology of 4D ‐Printed Magnetorheological Elastomers Fabricated Using Fused Filament Fabrication. Polymer Engineering & Science. 2026;66(5):3457-3465. doi:10.1002/pen.70437

BibTeX
@article{Kadir2026,
  author = {Kadir, Khairul Anwar Abdul and Mazlan, Saiful Amri and Yusuf, Shahir Yasin Mohd and Fatah, Abdul Yasser Abd and Johari, Mohd Aidy Faizal and Nordin, Nur Azmah and Bahiuddin, Irfan and Li, Weihua and Sukarman, Ahmad Fitri},
  title = {Field‐Dependent Rheology of 4D ‐Printed Magnetorheological Elastomers Fabricated Using Fused Filament Fabrication},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {5},
  pages = {3457--3465},
  doi = {10.1002/pen.70437}
}
Kostenlos starten →