Machine-Learning-Enabled Tensile Property Prediction of Fused-Filament-Fabrication-Printed Recycled PLA/Wood Composites Fabricated via Solution Casting
Polymers · 25.07.2026 · 18 (15) · 1820
DOI: 10.3390/polym18151820 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 25.07.2026. Verfasst von Venkata Durga Sahithi Vaka und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad 500080, India. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ural Federal University, Ministry of Science and Higher Education of the Russian Federation.
Abstract (Originalsprache)
This study investigated the manufacturing and impact of critical input parameters in fused filament fabrication (FFF) on the ultimate tensile strength (UTS) of tailor-made recycled PLA/wood bio-composite specimens. As technology advances rapidly, several wood-based polymer composites have emerged as promising materials for wood-based interior applications. In the current work, recycled PLA material is combined with wood powders to form composite 3D printing filaments. The solution casting method is used to recycle the PLA and a single-screw extruder is used to fabricate the composite filament. 3D printing parameters play a major role in enhancing the characteristics of the wood-based polymers. This study considers the printing temperature (PT), layer height (LH), and printing speed (PS) as input parameters at five levels. Taguchi Design of Experiments (L25 orthogonal array) was employed to minimize experimental runs, followed by ANOVA analysis to find influencing factors. The results demonstrated that layer height (83.91% contribution) is the most critical parameter, with 0.1 mm identified as the optimal amount for achieving the maximum UTS response, while printing temperature (2.47%) had a moderate effect and printing speed (2.28%) showed negligible influence. In the present work, the tensile properties of the composite filament were predicted using machine learning methodologies, including random forest (RF), support vector regressor (SVR), Gradient Boosting Regression (GBR), Extreme Gradient Boosting (XG Boost), and Adaptive Boosting (Adaboost). The results indicate that support vector regressor (SVR) outperformed all other models in terms of generalization, as it generated the lowest test errors (mean squared error (MSE) = 0.0169, mean absolute error (MAE) = 0.0953, mean squared logarithmic error (MSLE) = 0.0065 and mean absolute percentage error (MAPE) = 0.2246) and the highest predictive power (coefficient of determination (R2) = 0.8679).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad 500080, India.
- Department of Mechanical Engineering, Lakireddy Bali Reddy College of Engineering, Mylavaram 521230, India.
- Department of Mechanical Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram 522502, India.
- Interdisciplinary Research Center for Construction and Building Materials, King Fahd University of Petroleum & Minerals (KFUPM), Dhahran 31261, Saudi Arabia.
- Department of Nuclear and Renewable Energy Sources, Ural Federal University Named After the First President of Russia B. N. Yeltsin, 620002 Yekaterinburg, Russia.
ORCID-Profile: Venkata Durga Sahithi Vaka, Dhanunjay Kumar Ammisetti, Priyaranjan Samal, Ravi Kumar Kottala, Seepana Praveenkumar, Jamal-Eldin F M Ibrahim
Förderung
- Ural Federal University
- Ministry of Science and Higher Education of the Russian Federation
Zitieren
APA
Vaka, V. D. S., Ammisetti, D. K., Sarath, K. S., Samal, P., Kottala, R. K., Praveenkumar, S., & Ibrahim, J. F. M. (2026). Machine-Learning-Enabled Tensile Property Prediction of Fused-Filament-Fabrication-Printed Recycled PLA/Wood Composites Fabricated via Solution Casting. Polymers, 18(15), 1820. https://doi.org/10.3390/polym18151820
Vancouver
Vaka VDS, Ammisetti DK, Sarath KS, Samal P, Kottala RK, Praveenkumar S, et al. Machine-Learning-Enabled Tensile Property Prediction of Fused-Filament-Fabrication-Printed Recycled PLA/Wood Composites Fabricated via Solution Casting. Polymers. 2026;18(15):1820. doi:10.3390/polym18151820
BibTeX
@article{Vaka2026,
author = {Vaka, Venkata Durga Sahithi and Ammisetti, Dhanunjay Kumar and Sarath, Kruthiventi Sai and Samal, Priyaranjan and Kottala, Ravi Kumar and Praveenkumar, Seepana and Ibrahim, Jamal-Eldin F M},
title = {Machine-Learning-Enabled Tensile Property Prediction of Fused-Filament-Fabrication-Printed Recycled PLA/Wood Composites Fabricated via Solution Casting},
journal = {Polymers},
year = {2026},
volume = {18},
number = {15},
pages = {1820},
doi = {10.3390/polym18151820}
}
EUVIMED