EUVIMEDObjevte EUVIMED
Crossref

Hybrid Reinforcement in PA6 Composites via Ternary Filler Systems: Glass Fibers, Talc, and Glass Beads

Hasti Bizhani, Sedigheh Bagheri Kazemabad, Mohsen Jamali, Reza Bagheri

Polymer Composites · 2026-11-16

DOI: 10.1002/pc.71792 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-11-16. Written by Hasti Bizhani and 3 co-authors. 58 references.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

A ternary hybrid filler system comprising glass fiber (F), glass bead (B), and talc (T) was developed, and the effects of single, binary, and ternary combinations were investigated at a constant total filler loading of 30 wt.%. The composites were prepared by melt blending using a co‐rotating twin‐screw extruder. Mechanical properties were evaluated through tensile, flexural, and Charpy impact (notched and unnotched) tests, along with heat deflection temperature (HDT) and injection‐molding shrinkage measurements. Filler distribution and interfacial features were qualitatively examined using scanning electron microscopy (SEM). Results indicate that filler geometry, aspect ratio, and interfacial bonding critically influence stress transfer, stiffness, toughness, and thermal performance. Glass fiber significantly improves stiffness, strength, and HDT but increases shrinkage anisotropy relative to unreinforced PA6. Talc enhances stiffness and dimensional stability, whereas glass beads provide more isotropic reinforcement. Combining F, B, and T can provide a favorable balance of mechanical performance and thermal resistance. Among the hybrid formulations, PA‐20F‐5B‐5T exhibits the best balance of properties, combining the highest tensile and flexural strengths (127 MPa and 178 MPa, respectively), superior notched and unnotched impact strengths (6.7 and 56 kJ/m 2 , respectively), the highest tensile strain (4.1%), the highest HDT (~188°C), and the lowest shrinkage in the flow and transverse directions. These findings suggest that multi‐filler architectures can mitigate some conventional material trade‐offs and offer a route to high‐performance, dimensionally stable PA6 composites for precision engineering applications. The proposed mechanisms are interpretations based on property trends and qualitative SEM observations, not verified by direct structural analysis.

Cite

APA

Bizhani, H., Kazemabad, S. B., Jamali, M., & Bagheri, R. (2026). Hybrid Reinforcement in PA6 Composites via Ternary Filler Systems: Glass Fibers, Talc, and Glass Beads. Polymer Composites. https://doi.org/10.1002/pc.71792

Vancouver

Bizhani H, Kazemabad SB, Jamali M, Bagheri R. Hybrid Reinforcement in PA6 Composites via Ternary Filler Systems: Glass Fibers, Talc, and Glass Beads. Polymer Composites. 2026. doi:10.1002/pc.71792

BibTeX
@article{Bizhani2026,
  author = {Bizhani, Hasti and Kazemabad, Sedigheh Bagheri and Jamali, Mohsen and Bagheri, Reza},
  title = {Hybrid Reinforcement in PA6 Composites via Ternary Filler Systems: Glass Fibers, Talc, and Glass Beads},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71792}
}
Start for free →