EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Hybrid Laminated Composites Reinforced with Bamboo, Flex Banner, and Glass Fibers: Impact of CaCO3 Filler on Mechanical Properties

Rahmat Doni Widodo, Muhammad Irfan Nuryanta, Prima Astuti Handayani, Rizky Ichwan, Edi Syams Zainudin iD, Muhammad Akhsin Muflikhun iD

Polymers · 20.01.2026 · 18 (2) · 275

DOI: 10.3390/polym18020275 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.01.2026. Verfasst von Rahmat Doni Widodo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Universitas Negeri Semarang, Semarang 50229, Indonesia. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: (EQUITY 2025) Program, Directorate of Institutional Affairs, Directorate-General of Higher Education, Ministry of Higher Education, Science, and Technology of…, Universitas Negeri Semarang.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for sustainable polymer composites has driven the development of hybrid laminates that combine natural, recycled, and synthetic reinforcements while maintaining adequate mechanical performance. However, the combined influence of stacking sequence and mineral filler addition on the mechanical behavior of such sustainable hybrid systems remains insufficiently understood. In this study, sustainable hybrid laminated composites based on epoxy reinforced with glass fiber (G), bamboo fiber (B), and flex banner (F) were fabricated with varying stacking sequences and calcium carbonate (CaCO3) filler contents (0 and 1 wt.%). A total of nine laminate configurations were produced and evaluated through flexural and impact testing. The results demonstrate that mechanical performance is strongly governed by laminate architecture and filler addition. The bamboo-dominant G/B/B/B/G laminate containing 1 wt.% CaCO3 exhibited the highest flexural strength (191 MPa) and impact resistance (0.766 J/mm2), indicating a synergistic effect between reinforcement arrangement and CaCO3-induced matrix strengthening. In contrast, the lowest performance was observed for the G/F/B/F/G configuration without filler. Overall, all hybrid composites outperformed neat epoxy, highlighting the potential of bamboo–flex banner hybrid laminates with CaCO3 filler for sustainable composite applications requiring balanced mechanical properties. This work aligns with SDG 12 by promoting resource-efficient circular-economy practices through the utilization of flex banner material and natural fibers as reinforcements in epoxy-based hybrid composites.

Schlagwörter

Stichwörter der Autor:innen

CaCO3 fillerSDG 12hybrid compositesnatural fiberresource efficiency

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Universitas Negeri Semarang, Semarang 50229, Indonesia.
  • Department of Chemical Engineering, Faculty of Engineering, Universitas Negeri Semarang, Semarang 50229, Indonesia.
  • Advanced Engineering Materials and Composite Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia (UPM), Serdang 43400, Selangor, Malaysia.
  • Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada, Jl. Grafika No. 2, Yogyakarta 55281, Indonesia.

ORCID-Profile: Edi Syams Zainudin, Muhammad Akhsin Muflikhun

Förderung

  • (EQUITY 2025) Program, Directorate of Institutional Affairs, Directorate-General of Higher Education, Ministry of Higher Education, Science, and Technology of…
  • Universitas Negeri Semarang

Zitieren

APA

Widodo, R. D., Nuryanta, M. I., Handayani, P. A., Ichwan, R., Zainudin, E. S., & Muflikhun, M. A. (2026). Sustainable Hybrid Laminated Composites Reinforced with Bamboo, Flex Banner, and Glass Fibers: Impact of CaCO3 Filler on Mechanical Properties. Polymers, 18(2), 275. https://doi.org/10.3390/polym18020275

Vancouver

Widodo RD, Nuryanta MI, Handayani PA, Ichwan R, Zainudin ES, Muflikhun MA. Sustainable Hybrid Laminated Composites Reinforced with Bamboo, Flex Banner, and Glass Fibers: Impact of CaCO3 Filler on Mechanical Properties. Polymers. 2026;18(2):275. doi:10.3390/polym18020275

BibTeX
@article{Widodo2026,
  author = {Widodo, Rahmat Doni and Nuryanta, Muhammad Irfan and Handayani, Prima Astuti and Ichwan, Rizky and Zainudin, Edi Syams and Muflikhun, Muhammad Akhsin},
  title = {Sustainable Hybrid Laminated Composites Reinforced with Bamboo, Flex Banner, and Glass Fibers: Impact of CaCO3 Filler on Mechanical Properties},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {2},
  pages = {275},
  doi = {10.3390/polym18020275}
}
Kostenlos starten →