EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Structural Performance of Hybrid Fiber–Metal Laminates Reinforced With Natural and Synthetic Fibers: Tensile, Dynamic–Mechanical, and Residual Stress Behavior

Vilson Dalla Libera Junior, Alysson Martins Almeida Silva, Linconl Araujo Teixeira, Marielle da Silva Macedo, Sandra Maria da Luz

Polymer Composites · 2026-11-10 · 47 (21) · 19718-19739

DOI: 10.1002/pc.71575 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-09-02. Written by Vilson Dalla Libera Junior and 4 co-authors. 49 references. The full text is freely available (open access, CC BY 4.0). Funded by: Conselho Nacional de Desenvolvimento Científico e Tecnológico, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Universidade de Brasília.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

This work studied how hybridization between natural and synthetic fibers influences the structural tensile performance, viscoelastic response, and residual stress distribution in fiber–metal laminates (FMLs). Two groups of laminates were produced: (i) fiber‐reinforced polymer (FRP) composites made from carbon, glass, and sisal fibers and (ii) FMLs, including nonhybrid and hybrid configurations with alternating natural and synthetic FRP layers. Tensile properties were determined using digital image correlation (DIC), and failure mechanisms were characterized by x‐ray microtomography. The viscoelastic response was analyzed by multifrequency dynamic mechanical analysis (DMA), while residual stresses were quantified using the layer removal method. The results showed that hybridization did not significantly affect tensile strength but increased strain capacity and energy dissipation due to sisal fibers. DMA indicated higher T g (up to 108°C) and E a (up to 520 kJ mol −1 ) when sisal plies were placed at the laminate core, reflecting enhanced confinement. Residual stress analysis confirmed reduced tensile stresses in aluminum and compressive stresses in FRP layers, leading to a more homogeneous stress state. These findings show that integrating natural fibers improves structural stress distribution and viscoelastic stability while reducing the synthetic fiber content in hybrid composite structures.

Funding

  • Conselho Nacional de Desenvolvimento Científico e Tecnológico
  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
  • Universidade de Brasília
  • Instituto Federal Goiás

Cite

APA

Junior, V. D. L., Silva, A. M. A., Teixeira, L. A., Macedo, M. D. S., & Luz, S. M. D. (2026). Structural Performance of Hybrid Fiber–Metal Laminates Reinforced With Natural and Synthetic Fibers: Tensile, Dynamic–Mechanical, and Residual Stress Behavior. Polymer Composites, 47(21), 19718-19739. https://doi.org/10.1002/pc.71575

Vancouver

Junior VDL, Silva AMA, Teixeira LA, Macedo MDS, Luz SMD. Structural Performance of Hybrid Fiber–Metal Laminates Reinforced With Natural and Synthetic Fibers: Tensile, Dynamic–Mechanical, and Residual Stress Behavior. Polymer Composites. 2026;47(21):19718-19739. doi:10.1002/pc.71575

BibTeX
@article{Junior2026,
  author = {Junior, Vilson Dalla Libera and Silva, Alysson Martins Almeida and Teixeira, Linconl Araujo and Macedo, Marielle da Silva and Luz, Sandra Maria da},
  title = {Structural Performance of Hybrid Fiber–Metal Laminates Reinforced With Natural and Synthetic Fibers: Tensile, Dynamic–Mechanical, and Residual Stress Behavior},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {21},
  pages = {19718--19739},
  doi = {10.1002/pc.71575}
}
Start for free →