EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates

Yuting Fang, Dongfa Sheng, Zhongzhao Lin iD, Peng Fei

Polymers · 06.01.2024 · 16 (2) · 173

DOI: 10.3390/polym16020173 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.01.2024. Verfasst von Yuting Fang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Southwest Forestry University, Kunming 650224, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Scientific Research Fund of Yunnan Provincial Education Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the low-velocity impact behavior and damage modes of carbon/glass-hybrid fiber-reinforced magnesium alloy laminates (FMLs-H) and pure carbon-fiber-reinforced magnesium alloy laminates (FMLs-C) are investigated using experimental, theoretical modeling, and numerical simulation methods. Low-velocity impact tests were conducted at incident energies of 20 J, 40 J, and 60 J using a drop-weight impact tester, and the load–displacement curves and energy–time curves of the FMLs were recorded and plotted. The results showed that compared with FMLs-C, the stiffness of FMLs-H was slightly reduced, but the peak load and energy absorption were both greatly improved. Finally, a finite element model based on the Abaqus-VUMAT subroutine was developed to simulate the experimental results, and the damage modes of the metal layer, fiber layer, and interlayer were observed and analyzed. The experimental results are in good agreement with the finite element analysis results. The damage mechanisms of two kinds of FMLs under low-velocity impacts are discussed, providing a reference for the design and application of laminates.

Schlagwörter

Stichwörter der Autor:innen

damage modefiber metal laminateshybrid fiberlow-velocity impactlow-velocity impact behaviornumerical simulation

Autor:innen und Institutionen

  • School of Civil Engineering, Southwest Forestry University, Kunming 650224, China.
  • Key Laboratory of Forest Disaster Warning and Control of Yunnan Province, Southwest Forestry University, Kunming 650224, China.
  • School of Resources, Environment and Safety Engineering, University of South China, Hengyang 421001, China.

ORCID-Profile: Zhongzhao Lin

Förderung

  • National Natural Science Foundation of China
  • Scientific Research Fund of Yunnan Provincial Education Department

Zitieren

APA

Fang, Y., Sheng, D., Lin, Z., & Fei, P. (2024). Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates. Polymers, 16(2), 173. https://doi.org/10.3390/polym16020173

Vancouver

Fang Y, Sheng D, Lin Z, Fei P. Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates. Polymers. 2024;16(2):173. doi:10.3390/polym16020173

BibTeX
@article{Fang2024,
  author = {Fang, Yuting and Sheng, Dongfa and Lin, Zhongzhao and Fei, Peng},
  title = {Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {2},
  pages = {173},
  doi = {10.3390/polym16020173}
}
Kostenlos starten →