EUVIMEDDescoperă EUVIMED
Crossref

Degradation Behavior and Service Life Prediction of Three‐Dimensional ( 3D )‐Printed Polylactic Acid ( PLA )‐Based Composites Under Ultraviolet ( UV ) Aging

Yufeng Sun, Mingyang Liu, Jingzu Li, Qinglei Liu, Zhibo Zhang, Jilai Ying, Ing Kong

Polymer Composites · 2026-10-10 · 47 (19) · 17687-17701

DOI: 10.1002/pc.71446 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-07-26. Written by Yufeng Sun and 6 co-authors. 63 references. Funded by: China Scholarship Council.

RezumatDate bibliograficeCiteRelated studies

Abstract (original language)

Under the “dual carbon” strategy and the growing demand for automotive lightweighting, the mechanical properties and service life evaluation of three‐dimensional (3D) printed green composites have attracted considerable attention. In this study, two composite materials, rice husk (RH)/polylactic acid (PLA) and starch (ST)/RH/PLA, were fabricated by fused deposition modeling (FDM) and subjected to accelerated ultraviolet (UV) aging tests. The evolution of their microstructure, thermal stability, crystallization characteristics, and mechanical properties was systematically analyzed. The results showed that the incorporation of RH retarded the UV degradation of the PLA matrix and effectively improved its thermal stability. After 16 weeks of UV aging, the compressive strength loss rate of RH/PLA was 37.66%, while that of ST/RH/PLA reached 41.81%, indicating a more pronounced decline in mechanical properties with the addition of ST. Based on the degradation behavior of the compressive strength, an aging model was established. By incorporating the comprehensive acceleration factors of temperature, humidity, and UV radiation, the service life of the 3D printed RH/PLA composite in an automotive interior environment was predicted to be approximately 19.8 years, which satisfies the design service life requirement of 15 years.

Funding

  • China Scholarship Council

Cite

APA

Sun, Y., Liu, M., Li, J., Liu, Q., Zhang, Z., Ying, J., & Kong, I. (2026). Degradation Behavior and Service Life Prediction of Three‐Dimensional ( 3D )‐Printed Polylactic Acid ( PLA )‐Based Composites Under Ultraviolet ( UV ) Aging. Polymer Composites, 47(19), 17687-17701. https://doi.org/10.1002/pc.71446

Vancouver

Sun Y, Liu M, Li J, Liu Q, Zhang Z, Ying J, et al. Degradation Behavior and Service Life Prediction of Three‐Dimensional ( 3D )‐Printed Polylactic Acid ( PLA )‐Based Composites Under Ultraviolet ( UV ) Aging. Polymer Composites. 2026;47(19):17687-17701. doi:10.1002/pc.71446

BibTeX
@article{Sun2026,
  author = {Sun, Yufeng and Liu, Mingyang and Li, Jingzu and Liu, Qinglei and Zhang, Zhibo and Ying, Jilai and Kong, Ing},
  title = {Degradation Behavior and Service Life Prediction of Three‐Dimensional ( 3D )‐Printed Polylactic Acid ( PLA )‐Based Composites Under Ultraviolet ( UV ) Aging},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {19},
  pages = {17687--17701},
  doi = {10.1002/pc.71446}
}
Start for free →