EUVIMEDEUVIMED entdecken
Crossref

A compression–shear specimen for mechanical characterization of 3D-printed polylactic acid (PLA)

Raydan Salem, Ghazi Alsoruji, Muhammad Basha, Ramzi Othman

Green Materials · 29.06.2026 · 1-14

DOI: 10.1680/jgrma.25.00034 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Green Materials, online erschienen am 29.06.2026. Verfasst von Raydan Salem und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The current study explores the mechanical behavior of 3D-printed polylactic acid (PLA) specimens under shear deformation, employing both numerical simulations and experimental testing. A compression–shear specimen was designed and optimized to convert a compression load into shear deformation in two symmetric gauge regions. A full factorial parametric study was employed to determine the optimal geometry of the specimen. The shear stress error is reduced from 86% of the initial specimen dimensions to 4% of the optimized one. The optimized design was produced using the fusion filament fabrication (FFF) additive manufacturing technique. Compression–shear tests were performed using a universal testing machine, generating shear stress–shear strain curves. In addition, the shear modulus and shear yield stress were evaluated. The results align with previous findings reported in the literature, demonstrating that the proposed compression–shear specimen geometry is suitable for further experimental studies. Such studies could explore the impact of FFF process parameters on the shear behavior of PLA or other 3D-printed materials.

Zitieren

APA

Salem, R., Alsoruji, G., Basha, M., & Othman, R. (2026). A compression–shear specimen for mechanical characterization of 3D-printed polylactic acid (PLA). Green Materials, 1-14. https://doi.org/10.1680/jgrma.25.00034

Vancouver

Salem R, Alsoruji G, Basha M, Othman R. A compression–shear specimen for mechanical characterization of 3D-printed polylactic acid (PLA). Green Materials. 2026:1-14. doi:10.1680/jgrma.25.00034

BibTeX
@article{Salem2026,
  author = {Salem, Raydan and Alsoruji, Ghazi and Basha, Muhammad and Othman, Ramzi},
  title = {A compression–shear specimen for mechanical characterization of 3D-printed polylactic acid (PLA)},
  journal = {Green Materials},
  year = {2026},
  pages = {1--14},
  doi = {10.1680/jgrma.25.00034}
}
Kostenlos starten →