EUVIMEDFaigh amach EUVIMED
Open access · CC BY-NC-ND 4.0

Acrylonitrile Styrene Acrylate ( ASA ) With Optimized Aluminum Oxide ( Al 2 O 3 ) Nanofiller Content for MEX Additive Manufacturing: Thermomechanical, Rheological, and Quality Metrics

Nectarios Vidakis, Markos Petousis, Nikolaos Michailidis, Emmanuel Stratakis, Vassilis M. Papadakis, Maria Spyridaki, Aikaterini Gkagkanatsiou, Apostolos Argyros, Nektarios K. Nasikas

Polymer Composites · 2026-10-10 · 47 (19) · 17514-17532

DOI: 10.1002/pc.71432 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-07-14. Written by Nectarios Vidakis and 8 co-authors. Cited 1 times so far (Crossref); 139 references. The full text is freely available (open access, CC BY-NC-ND 4.0).

AchoimreSonraí leabharliostaCiteRelated studies

Abstract (original language)

As additive manufacturing (AM) continues to expand, the demand for durable components for outdoor applications is increasing. Acrylonitrile styrene acrylate (ASA), a weather‐resistant polymer, is widely used in these applications, and improving its performance could broaden its range of applications. In this study, ceramic aluminum oxide (Al 2 O 3 ) nanoparticles, known for their hardness and insulating properties, were added to ASA to produce enhanced nanocomposites for AM. Five filler loadings (2.0–10.0 wt%) were evaluated and compared with neat ASA. The resulting materials were characterized through thermomechanical, mechanical, thermal, morphological, rheological, structural, and quality assessments. Aluminum oxide improved the mechanical performance by 13.1% to 16.8% and structural metrics by 13.1% for tensile and flexural strength and up to 45.6% for porosity reduction. The nanoparticles also affected the morphology of the samples, which may be critical for specific applications. Among the formulations, the 6 wt% composite performed best, indicating that intermediate filler levels offer the best balance of reinforcement, quality, and processability. These results provide new insights into ASA/Al 2 O 3 ceramic nanocomposites produced by AM.

Cite

APA

Vidakis, N., Petousis, M., Michailidis, N., Stratakis, E., Papadakis, V. M., Spyridaki, M., Gkagkanatsiou, A., Argyros, A., & Nasikas, N. K. (2026). Acrylonitrile Styrene Acrylate ( ASA ) With Optimized Aluminum Oxide ( Al 2 O 3 ) Nanofiller Content for MEX Additive Manufacturing: Thermomechanical, Rheological, and Quality Metrics. Polymer Composites, 47(19), 17514-17532. https://doi.org/10.1002/pc.71432

Vancouver

Vidakis N, Petousis M, Michailidis N, Stratakis E, Papadakis VM, Spyridaki M, et al. Acrylonitrile Styrene Acrylate ( ASA ) With Optimized Aluminum Oxide ( Al 2 O 3 ) Nanofiller Content for MEX Additive Manufacturing: Thermomechanical, Rheological, and Quality Metrics. Polymer Composites. 2026;47(19):17514-17532. doi:10.1002/pc.71432

BibTeX
@article{Vidakis2026,
  author = {Vidakis, Nectarios and Petousis, Markos and Michailidis, Nikolaos and Stratakis, Emmanuel and Papadakis, Vassilis M. and Spyridaki, Maria and Gkagkanatsiou, Aikaterini and Argyros, Apostolos and Nasikas, Nektarios K.},
  title = {Acrylonitrile Styrene Acrylate ( ASA ) With Optimized Aluminum Oxide ( Al 2 O 3 ) Nanofiller Content for MEX Additive Manufacturing: Thermomechanical, Rheological, and Quality Metrics},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {19},
  pages = {17514--17532},
  doi = {10.1002/pc.71432}
}
Start for free →