Acrylonitrile Styrene Acrylate ( ASA ) With Optimized Aluminum Oxide ( Al 2 O 3 ) Nanofiller Content for MEX Additive Manufacturing: Thermomechanical, Rheological, and Quality Metrics
Polymer Composites · 10.10.2026 · 47 (19) · 17514-17532
DOI: 10.1002/pc.71432 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 14.07.2026. Verfasst von Nectarios Vidakis und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 139 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
As additive manufacturing (AM) continues to expand, the demand for durable components for outdoor applications is increasing. Acrylonitrile styrene acrylate (ASA), a weather‐resistant polymer, is widely used in these applications, and improving its performance could broaden its range of applications. In this study, ceramic aluminum oxide (Al 2 O 3 ) nanoparticles, known for their hardness and insulating properties, were added to ASA to produce enhanced nanocomposites for AM. Five filler loadings (2.0–10.0 wt%) were evaluated and compared with neat ASA. The resulting materials were characterized through thermomechanical, mechanical, thermal, morphological, rheological, structural, and quality assessments. Aluminum oxide improved the mechanical performance by 13.1% to 16.8% and structural metrics by 13.1% for tensile and flexural strength and up to 45.6% for porosity reduction. The nanoparticles also affected the morphology of the samples, which may be critical for specific applications. Among the formulations, the 6 wt% composite performed best, indicating that intermediate filler levels offer the best balance of reinforcement, quality, and processability. These results provide new insights into ASA/Al 2 O 3 ceramic nanocomposites produced by AM.
Zitieren
APA
Vidakis, N., Petousis, M., Michailidis, N., Stratakis, E., Papadakis, V. M., Spyridaki, M., Gkagkanatsiou, A., Argyros, A., & Nasikas, N. K. (2026). Acrylonitrile Styrene Acrylate ( ASA ) With Optimized Aluminum Oxide ( Al 2 O 3 ) Nanofiller Content for MEX Additive Manufacturing: Thermomechanical, Rheological, and Quality Metrics. Polymer Composites, 47(19), 17514-17532. https://doi.org/10.1002/pc.71432
Vancouver
Vidakis N, Petousis M, Michailidis N, Stratakis E, Papadakis VM, Spyridaki M, et al. Acrylonitrile Styrene Acrylate ( ASA ) With Optimized Aluminum Oxide ( Al 2 O 3 ) Nanofiller Content for MEX Additive Manufacturing: Thermomechanical, Rheological, and Quality Metrics. Polymer Composites. 2026;47(19):17514-17532. doi:10.1002/pc.71432
BibTeX
@article{Vidakis2026,
author = {Vidakis, Nectarios and Petousis, Markos and Michailidis, Nikolaos and Stratakis, Emmanuel and Papadakis, Vassilis M. and Spyridaki, Maria and Gkagkanatsiou, Aikaterini and Argyros, Apostolos and Nasikas, Nektarios K.},
title = {Acrylonitrile Styrene Acrylate ( ASA ) With Optimized Aluminum Oxide ( Al 2 O 3 ) Nanofiller Content for MEX Additive Manufacturing: Thermomechanical, Rheological, and Quality Metrics},
journal = {Polymer Composites},
year = {2026},
volume = {47},
number = {19},
pages = {17514--17532},
doi = {10.1002/pc.71432}
}
EUVIMED