EUVIMEDSkopri EUVIMED
Open access · CC BY-NC-ND 4.0

Assessing and Quantifying Variability Across Vacuum‐Assisted Resin Infusion Variants for Aerospace‐Grade Composite Manufacturing

Ilhan Kahraman, Nilperi Uysal, Çağlar Subaşı, Selin Dursun, Muhammet İskender, Özgü Çalın, Uğur Şimşir, Hatice S. Sas, A. Tuğrul Seyhan

Polymer Composites · 2026-08-10 · 47 (15) · 13664-13684

DOI: 10.1002/pc.71180 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-06-05. Written by Ilhan Kahraman and 8 co-authors. Cited 1 times so far (Crossref); 32 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Conventional vacuum‐assisted resin transfer molding (C‐VARTM) is recognized as a cost‐effective resin infusion technique for manufacturing large‐scale composite structures. However, C‐VARTM suffers from inherent limitations, notably non‐uniform resin flow, uncontrolled vacuum levels that generate unstable pressure gradients, and variability in fiber compaction. These factors collectively reduce process repeatability and dimensional precision, posing a major constraint to qualifying C‐VARTM laminates for aerospace applications. Therefore, identifying, understanding, and justifying the dominant sources of process variability is essential to enable reliable production of aerospace‐grade composite structures at quality levels comparable to autoclave processing. In this study, C‐VARTM, employing flow distribution media, vacuum bagging, and passive impregnation without auxiliary compaction, was used as the baseline. Several vacuum infusion variants, including pressure‐driven vacuum infusion (PD‐VARTM), vibration‐assisted vacuum infusion (VAVI), controlled atmospheric pressure resin infusion (CAPRI), and the membrane‐assisted vacuum infusion process (MAVIP), were evaluated in terms of laminate density, fiber volume fraction (FVF), void content, and thickness uniformity, quantified at the resin inlet and vacuum outlet. Flexural testing was conducted on all laminates to evaluate their structural performance against panels produced by the aerospace‐qualified, Bombardier‐patented resin transfer infusion (RTI) process, whose first successful laboratory scale implementation based on soft‐stiff compaction concept is reported here, thereby addressing a key gap in the literature.

Funding

  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu

Cite

APA

Kahraman, I., Uysal, N., Subaşı, Ç., Dursun, S., İskender, M., Çalın, Ö., Şimşir, U., Sas, H. S., & Seyhan, A. T. (2026). Assessing and Quantifying Variability Across Vacuum‐Assisted Resin Infusion Variants for Aerospace‐Grade Composite Manufacturing. Polymer Composites, 47(15), 13664-13684. https://doi.org/10.1002/pc.71180

Vancouver

Kahraman I, Uysal N, Subaşı Ç, Dursun S, İskender M, Çalın Ö, et al. Assessing and Quantifying Variability Across Vacuum‐Assisted Resin Infusion Variants for Aerospace‐Grade Composite Manufacturing. Polymer Composites. 2026;47(15):13664-13684. doi:10.1002/pc.71180

BibTeX
@article{Kahraman2026,
  author = {Kahraman, Ilhan and Uysal, Nilperi and Subaşı, Çağlar and Dursun, Selin and İskender, Muhammet and Çalın, Özgü and Şimşir, Uğur and Sas, Hatice S. and Seyhan, A. Tuğrul},
  title = {Assessing and Quantifying Variability Across Vacuum‐Assisted Resin Infusion Variants for Aerospace‐Grade Composite Manufacturing},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {15},
  pages = {13664--13684},
  doi = {10.1002/pc.71180}
}
Start for free →