EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Facing Evaluation on Vacuum Assisted Resin Infusion (Vari) Co-Cured Sandwich Composites: Inlet and Outlet Comparison

Rijal Ahmadi, Hermawan Judawisastra, Riza Wirawan

Indonesian Journal of Aerospace · 26.10.2026 · 24 (1) · 51-60

DOI: 10.55981/ijoa.2026.13523 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Indonesian Journal of Aerospace, online erschienen am 26.10.2026. Verfasst von Rijal Ahmadi und 2 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sandwich composites are preferred in marine or aerospace applications due to their superior specific flexural properties. Low-cost, high-quality sandwich composites can be produced using the co-curing method with the Vacuum Assisted Resin Infusion (VARI) manufacturing technique. However, manufacturing composites with VARI results in thickness variation between the resin inlet and vacuum outlet, thus affecting the uniformity of mechanical properties. This study evaluated the facing properties variation of sandwich composites fabricated using the VARI co-cure method with different numbers of facing plies. Sandwich composites were fabricated with carbon fiber/epoxy and PVC foam using the VARI co-cure method with central linear infusion. The thickness, fiber volume fraction, and tensile properties of the facings were evaluated at the resin inlet and the vacuum outlet for comparison. The sandwich composites were successfully fabricated using the VARI co-cure method. The facing properties between the resin inlet and vacuum outlet have variations of 2,6-15.0 % in thickness, 0.7-5.5 % in fiber volume fraction, 3.6-6.2 % in tensile modulus, and 5,7-35.17 % in tensile strength. Upper facings tend to have a higher property variation than lower ones. As the number of facing plies increases from 2 to 6, the thickness variation and the fiber volume fraction also increase, resulting in a higher variation in tensile modulus and strength.

Zitieren

APA

Ahmadi, R., Judawisastra, H., & Wirawan, R. (2026). Facing Evaluation on Vacuum Assisted Resin Infusion (Vari) Co-Cured Sandwich Composites: Inlet and Outlet Comparison. Indonesian Journal of Aerospace, 24(1), 51-60. https://doi.org/10.55981/ijoa.2026.13523

Vancouver

Ahmadi R, Judawisastra H, Wirawan R. Facing Evaluation on Vacuum Assisted Resin Infusion (Vari) Co-Cured Sandwich Composites: Inlet and Outlet Comparison. Indonesian Journal of Aerospace. 2026;24(1):51-60. doi:10.55981/ijoa.2026.13523

BibTeX
@article{Ahmadi2026,
  author = {Ahmadi, Rijal and Judawisastra, Hermawan and Wirawan, Riza},
  title = {Facing Evaluation on Vacuum Assisted Resin Infusion (Vari) Co-Cured Sandwich Composites: Inlet and Outlet Comparison},
  journal = {Indonesian Journal of Aerospace},
  year = {2026},
  volume = {24},
  number = {1},
  pages = {51--60},
  doi = {10.55981/ijoa.2026.13523}
}
Kostenlos starten →