EUVIMEDAtklāt EUVIMED
Crossref

Influence of Porosity on the Mechanical and Tribological Properties of Porous ATP / GF / UHMWPE Water‐Lubricated Bearing Composite Materials

Wenkai Gao, Guorui Wei, Xiuli Zhang, Gengyuan Gao, Hongyu Zheng, Leian Zhang, Qin Dong

Polymer Composites · 2026-07-20 · 47 (14) · 12384-12402

DOI: 10.1002/pc.71097 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-04-10. Written by Wenkai Gao and 6 co-authors. 46 references. Funded by: Natural Science Foundation of Shandong Province, National Natural Science Foundation of China.

AbstraktsBibliogrāfiskie datiCiteRelated studies

Abstract (original language)

To improve the tribological properties of ultra‐high molecular weight polyethylene (UHMWPE) water‐lubricated bearing composites, attapulgite (ATP)/glass fiber (GF)/UHMWPE composites were modified into porous materials using NaCl as a porogen. The porosity, surface topography, wettability, mechanical and tribological properties of the porous materials with varying porogen contents were examined, as well as their performance in water‐lubricated thrust bearings. The results demonstrate that as porosity increases, the porous composites show better wettability, but reduced hardness and compressive strength. Both the dry friction and water‐lubricated friction coefficients exhibited an initial decrease followed by an increase, with the lowest average values observed at a porosity of 9.9%. Under water‐lubricated conditions, residual NaCl in the porous composites is exposed and leached out during friction, creating new pores. The hydrodynamic effect generated by these pores, combined with the reduced contact area between friction pairs, ultimately endows the porous composites with superior tribological performance in water‐lubricated bearings, outperforming non‐porous counterparts.

Funding

  • Natural Science Foundation of Shandong Province
  • National Natural Science Foundation of China

Cite

APA

Gao, W., Wei, G., Zhang, X., Gao, G., Zheng, H., Zhang, L., & Dong, Q. (2026). Influence of Porosity on the Mechanical and Tribological Properties of Porous ATP / GF / UHMWPE Water‐Lubricated Bearing Composite Materials. Polymer Composites, 47(14), 12384-12402. https://doi.org/10.1002/pc.71097

Vancouver

Gao W, Wei G, Zhang X, Gao G, Zheng H, Zhang L, et al. Influence of Porosity on the Mechanical and Tribological Properties of Porous ATP / GF / UHMWPE Water‐Lubricated Bearing Composite Materials. Polymer Composites. 2026;47(14):12384-12402. doi:10.1002/pc.71097

BibTeX
@article{Gao2026,
  author = {Gao, Wenkai and Wei, Guorui and Zhang, Xiuli and Gao, Gengyuan and Zheng, Hongyu and Zhang, Leian and Dong, Qin},
  title = {Influence of Porosity on the Mechanical and Tribological Properties of Porous ATP / GF / UHMWPE Water‐Lubricated Bearing Composite Materials},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {14},
  pages = {12384--12402},
  doi = {10.1002/pc.71097}
}
Start for free →