EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tribological Performance of Short Fibers Reinforced Thermoplastic Polyurethane Composite Materials Under Water-Lubricated Condition

Yicong Yu, Pan Jiang, Wei Yu, Zhiwei Guo iD

Polymers · 26.12.2024 · 17 (1) · 30

DOI: 10.3390/polym17010030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.12.2024. Verfasst von Yicong Yu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The water-lubricated bearing plays a crucial role in the ship propulsion system, significantly impacting vessel safety. However, under the harsh working conditions of low-speed and heavy-load, the lubrication state of water-lubricated bearings is usually poor, leading to serious friction and wear. To improve the tribological performance of composites and reduce friction, three short fibers (ultra-high-molecular-weight polyethylene fibers, basalt fibers, and bamboo fibers) with the same mass fraction (5%) were added into the melted thermoplastic polyurethane (TPU). The tribological behavior of these three composites under different loads and rotation speeds was investigated using the CBZ-1 friction and wear tester. Through the comprehensive analysis of the friction coefficient, the wear mass loss, and the surface morphology, it was confirmed that the filled fiber positively affected the tribological performance of thermoplastic polyurethane materials. The experimental results indicated that basalt fiber significantly improved the tribological performance of TPU, and the friction coefficient of the sample was only 0.088 under the working conditions of 0.5 MPa and 250 r/min, which was 70.57% lower than that of pure TPU material. And in all the tests, the minimum wear of the basalt fiber-reinforced composite is only 0.4 mg, which is also the smallest of all the materials under all conditions, and a decrease of 98.69% compared to TPU. Under high loads, ultra-high-molecular-weight polyethylene fiber and bamboo fiber-reinforced composites have smoother surfaces and exhibit better tribological properties. This study provides an experimental foundation for tribological performance enhancement for environmentally friendly, water-lubricated bearing composites.

Schlagwörter

Stichwörter der Autor:innen

fiber-reinforced compositesthermoplastic polyurethanetribological performancewater-lubricated bearing

Autor:innen und Institutionen

  • School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China.
  • State Key Laboratory of Maritime Technology and Safety, Wuhan University of Technology, Wuhan 430063, China.
  • Reliability Engineering Institute, National Engineering Research Center for Water Transportation Safety, Wuhan 430063, China.
  • Wuhan Branch of China Classification Society, Wuhan 430022, China.

ORCID-Profile: Zhiwei Guo

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yu, Y., Jiang, P., Yu, W., & Guo, Z. (2024). Tribological Performance of Short Fibers Reinforced Thermoplastic Polyurethane Composite Materials Under Water-Lubricated Condition. Polymers, 17(1), 30. https://doi.org/10.3390/polym17010030

Vancouver

Yu Y, Jiang P, Yu W, Guo Z. Tribological Performance of Short Fibers Reinforced Thermoplastic Polyurethane Composite Materials Under Water-Lubricated Condition. Polymers. 2024;17(1):30. doi:10.3390/polym17010030

BibTeX
@article{Yu2024,
  author = {Yu, Yicong and Jiang, Pan and Yu, Wei and Guo, Zhiwei},
  title = {Tribological Performance of Short Fibers Reinforced Thermoplastic Polyurethane Composite Materials Under Water-Lubricated Condition},
  journal = {Polymers},
  year = {2024},
  volume = {17},
  number = {1},
  pages = {30},
  doi = {10.3390/polym17010030}
}
Kostenlos starten →