EUVIMEDObjevte EUVIMED
Crossref

Predictive Reinforcement and Mechanical Characterization of Copper Wire Embedded Polymer Composites Toward Advanced Multifunctional Applications

Muhammad Jawad Ahmad, Xiaoyong Tian, Ali Akmal Zia, Cunbao Huo, Youwei Kang, Shahid Ghafoor, Shad Mohammad Shohel, Wudan Li

Polymer Composites · 2026-07-10 · 47 (13) · 12177-12194

DOI: 10.1002/pc.71086 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-04-10. Written by Muhammad Jawad Ahmad and 7 co-authors. Cited 3 times so far (Crossref); 60 references. Funded by: National Key Research and Development Program of China, Fundamental Research Funds for the Central Universities.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Polymer‐based material extrusion limits to provide the mechanical robustness and unit‐level reinforcement control needed for advanced structural or multifunctional applications. To address this limitation, this work introduces a programmable continuous copper‐wire embedding strategy that enables spatially controlled reinforcement within PLA using a standard extrusion printhead. A process‐derived embedding guideline is established to ensure stable wire deposition preventing drift, breakage, and interfacial defects, thereby enabling reliable fabrication of architected metal‐polymer composites. To generalize reinforcement behavior, a dimensionless Effective Reinforcement Index (ERI) is formulated, integrating metal volume share, modulus mismatch, and geometric stress factors into a predictive design descriptor. ERI correlates strongly with tensile and flexural strength ( R 2 = 0.81 and 0.91), providing a physics‐grounded rule for reinforcement targeting. Mechanical performance is systematically evaluated across wire diameters (0.1–0.3 mm) and hatch spacings using tensile, flexural, and ILSS tests, supported by SEM and X‐ray microscopy of fracture modes and embedding quality. The embedded copper wires yield significant improvements, up to 107% in tensile strength, 203% in modulus, 65% in flexural strength, 285% in flexural modulus, and 36% in ILSS relative to PLA. This study establishes a design‐driven platform for continuous metal‐wire embedding reinforcement in polymer, enabling programmable strengthening and predictive performance guidance for advanced functional composites.

Funding

  • National Key Research and Development Program of China
  • Fundamental Research Funds for the Central Universities

Cite

APA

Ahmad, M. J., Tian, X., Zia, A. A., Huo, C., Kang, Y., Ghafoor, S., Shohel, S. M., & Li, W. (2026). Predictive Reinforcement and Mechanical Characterization of Copper Wire Embedded Polymer Composites Toward Advanced Multifunctional Applications. Polymer Composites, 47(13), 12177-12194. https://doi.org/10.1002/pc.71086

Vancouver

Ahmad MJ, Tian X, Zia AA, Huo C, Kang Y, Ghafoor S, et al. Predictive Reinforcement and Mechanical Characterization of Copper Wire Embedded Polymer Composites Toward Advanced Multifunctional Applications. Polymer Composites. 2026;47(13):12177-12194. doi:10.1002/pc.71086

BibTeX
@article{Ahmad2026,
  author = {Ahmad, Muhammad Jawad and Tian, Xiaoyong and Zia, Ali Akmal and Huo, Cunbao and Kang, Youwei and Ghafoor, Shahid and Shohel, Shad Mohammad and Li, Wudan},
  title = {Predictive Reinforcement and Mechanical Characterization of Copper Wire Embedded Polymer Composites Toward Advanced Multifunctional Applications},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {13},
  pages = {12177--12194},
  doi = {10.1002/pc.71086}
}
Start for free →