Laser‐Induced 3D Graphene Enabled Polymer Composites with Improved Mechanical and Electrical Properties Toward Multifunctional Performance
Advanced Science · 2025-11 · 12 (43)
DOI: 10.1002/advs.202509039 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 03.09.2025. Verfasst von Fu Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Aerospace Engineering, North University of China, Taiyuan, 030051, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: North University of China and Beihang University, Postdoctoral Fellowship Program of CPSF, Fundamental Research Program of Shanxi Province.
Abstract (Originalsprache)
Conductive graphene‐based composites are attracting substantial interest due to their excellent mechanical and electrical properties for potential applications in electronics. Typically, such composites are fabricated by infiltrating the 3D graphene framework with the polymer matrix. However, the production of 3D graphene foams is limited by the challenges in preparing graphene dispersions, while 3D printing presents a significant breakthrough in the fabrication of desired 3D graphene‐based structures. Here, the utilization of the 3D printing technique driven by laser‐induced graphene (LIG) and a conventional penetration process for assembling graphene‐based conductive polymer composites is described. The synergistic integration endowed the proposed 3D‐LIG/epoxy composites with an electrical conductivity of 3.54 S m −1 in through‐plane, and a tensile strength of ≈5.4 MPa by a 7606% improvement with a high specific strength of 6.8 × 10 3 (N m) kg −1 . Meanwhile, the flexible composites exhibited an outstanding ductility reaching a 230% tensile‐failure strain and a 50% high linear elastic strain. The prepared 3D‐LIG/polymer composites thus demonstrated the functionalized behaviors for applications in de‐icing, microwave absorption, and flexible sensors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Aerospace Engineering, North University of China, Taiyuan, 030051, China.
- Shanxi Engineering Research Center of Unmanned Aerial Vehicle, North University of China, Taiyuan, 030051, China.
- School of Mechanical Engineering & Automation, Beihang University, No. 37 Xueyuan Road, Beijing, 100191, China.
- Beijing Tsing Aero Armament Technology Co., Ltd., Beijing, 100190, China.
- AVIC Research Institute for Special Structures of Aeronautical Composite, Ji'nan, 250023, China.
ORCID-Profile: Fu Liu, Jingyang Li
Förderung
- North University of China and Beihang University
- Postdoctoral Fellowship Program of CPSF
- Fundamental Research Program of Shanxi Province
- Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi
- Shandong Provincial Natural Science Foundation
- Natural Science Foundation of Shandong Province
Zitieren
APA
Liu, F., Luo, S., Li, J., Wang, Z., Wang, X., Hao, W., & Wang, Y. (2025). Laser‐Induced 3D Graphene Enabled Polymer Composites with Improved Mechanical and Electrical Properties Toward Multifunctional Performance. Advanced Science, 12(43). https://doi.org/10.1002/advs.202509039
Vancouver
Liu F, Luo S, Li J, Wang Z, Wang X, Hao W, et al. Laser‐Induced 3D Graphene Enabled Polymer Composites with Improved Mechanical and Electrical Properties Toward Multifunctional Performance. Advanced Science. 2025;12(43). doi:10.1002/advs.202509039
BibTeX
@article{Liu2025,
author = {Liu, Fu and Luo, Sida and Li, Jingyang and Wang, Zhe and Wang, Xu and Hao, Wenqian and Wang, Yanan},
title = {Laser‐Induced 3D Graphene Enabled Polymer Composites with Improved Mechanical and Electrical Properties Toward Multifunctional Performance},
journal = {Advanced Science},
year = {2025},
volume = {12},
number = {43},
doi = {10.1002/advs.202509039}
}
EUVIMED