EUVIMEDScopri EUVIMED
Open access · CC BY-NC-ND 4.0

Preparation and characterization of hybrid PLA biocomposites reinforced by wood and silane treated basalt fibers or compatibilized by maleic anhydride‐grafted polypropylene ( MAPP )

Mahmut Ali Ermeydan, Onur Aykanat, Yasin Altın

Polymer Composites · 2024-08-10 · 45 (11) · 9831-9844

DOI: 10.1002/pc.28442 ↗

At a glance

Journal article in Polymer Composites, published online on 2024-04-22. Written by Mahmut Ali Ermeydan and 2 co-authors. Cited 20 times so far (Crossref); 37 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

In this study, basalt and/or beech wood fibers were treated with vinyltrimethoxysilane or compatibilized by maleic anhydride‐ grafted polypropylene (MAPP) to produce hybrid polylactic acid (PLA) biocomposites. Twin‐screw extruder was used to produce biocomposites, following by a hot press to form samples. Physical and mechanical properties of composites that were produced from both treated and untreated fibers were compared. Chemical, morphological, and thermal analysis of biocomposites were analyzed with TGA, FTIR and SEM, respectively. The results showed that silane treated basalt/wood fiber reinforced PLA (PBWS) and silane treated basalt reinforced PLA (PBS) have significantly better flexural strength than neat PLA. Besides, basalt reinforced bio‐composites except PBW3 and PBWM variations have significantly superior impact strength than neat PLA. Utilization of compatibilizers also reduced thickness swelling and water uptake features of biocomposites. All the above experimental data showed that the utilization of silane compatibilizer has better impact on properties than MAPP for such wood/basalt hybrid composite. Highlights Hybrid biocomposites with wood and basalt fibers by using coupling agents were prepared for the first time. Hybridization of organic and inorganic fibers gave promising results. Silane and maleic anhydride compatibilization improves physical properties. Vinyltrimethoxy silane grafted basalt fiber improves flexural strength significantly. Silanization of wood or basalt fibers enhances significantly the impact strength.

Funding

  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu

Cite

APA

Ermeydan, M. A., Aykanat, O., & Altın, Y. (2024). Preparation and characterization of hybrid PLA biocomposites reinforced by wood and silane treated basalt fibers or compatibilized by maleic anhydride‐grafted polypropylene ( MAPP ). Polymer Composites, 45(11), 9831-9844. https://doi.org/10.1002/pc.28442

Vancouver

Ermeydan MA, Aykanat O, Altın Y. Preparation and characterization of hybrid PLA biocomposites reinforced by wood and silane treated basalt fibers or compatibilized by maleic anhydride‐grafted polypropylene ( MAPP ). Polymer Composites. 2024;45(11):9831-9844. doi:10.1002/pc.28442

BibTeX
@article{Ermeydan2024,
  author = {Ermeydan, Mahmut Ali and Aykanat, Onur and Altın, Yasin},
  title = {Preparation and characterization of hybrid PLA biocomposites reinforced by wood and silane treated basalt fibers or compatibilized by maleic anhydride‐grafted polypropylene ( MAPP )},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {11},
  pages = {9831--9844},
  doi = {10.1002/pc.28442}
}
Start for free →