Interfacial characterization of fique fiber–reinforced polypropylene composites compatibilized with maleic anhydride–grafted polypropylene (MAPP)
Science Progress · 2026-04 · 109 (4)
DOI: 10.1177/00368504261507154 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Progress, online erschienen am 06.11.2026. Verfasst von Julio Cuellar Posada und 3 weiteren Autor:innen. Beteiligte Einrichtung: Design of Advanced Composites Structures (DADCOMP), Facultad de Minas, Universidad Nacional de Colombia, Medellín, Colombia. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministerio de Ciencia, Tecnología e Innovación.
Abstract (Originalsprache)
Objective
Natural fiber/thermoplastic composites are often limited by weak fiber–matrix adhesion. This study evaluated the interface between fique fibers and a polypropylene (PP) matrix modified with maleic anhydride-grafted polypropylene (MAPP) and explored whether the point of zero charge (PZC) provides complementary information on interfacial compatibility relative to water contact angle measurements.
Methods
In a one-factor experimental design, PP was compounded with 0, 3, 5 and 8 wt.% MAPP and thermopressed with unidirectional fique fabrics. Interfacial shear strength (IFSS) was measured by microbond testing and analyzed with Weibull statistics; tensile and flexural properties were determined on two independently manufactured panels per MAPP level and analyzed by one-way ANOVA. Interfacial morphology was examined by scanning electron microscopy and X-ray computed tomography. Surface and molecular characterization included PZC, water contact angle, FTIR-ATR spectroscopy and density functional theory (DFT) calculations on cellobiose, PP-dimer and MAPP-dimer models.
Results
MAPP increased the Weibull scale IFSS from 2.85 MPa (0 wt.%) to 4.42 MPa (5 wt.%); 5 and 8 wt.% were not statistically different, but 5 wt.% showed the lowest scatter. Flexural strength depended significantly on MAPP content and increased by 52% at 5 wt.%, whereas the tensile and flexural modulus showed non-significant increasing trends and tensile strength was unaffected. The apparent PZC of the matrix decreased from 7.13 to 5.20 with 5 wt.% MAPP, approaching that of fique (4.51), whereas the water contact angle did not distinguish neat from MAPP-modified PP. DFT calculations predicted a more favorable cellulose–MAPP than cellulose–PP interaction.
Conclusions
MAPP significantly increased IFSS (5 and 8 wt.%) and flexural strength (p = 0.005); 5 wt.% provided the best compromise between interfacial strength, flexural performance and reproducibility within the tested range.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Design of Advanced Composites Structures (DADCOMP), Facultad de Minas, Universidad Nacional de Colombia, Medellín, Colombia.
- Grupo de Investigación Ciencia de Materiales Avanzados, Facultad de Ciencias, Departamento de Química, Universidad Nacional de Colombia, Medellín, Colombia.
- Fisicoquímica Orgánica, Facultad de Ciencias, Departamento de Química, Universidad Nacional de Colombia, Medellín, Colombia.
ORCID-Profile: Julio Cuellar Posada
Förderung
- Ministerio de Ciencia, Tecnología e Innovación
Zitieren
APA
Cuellar Posada, J., Palacio Betancur, J., Sánchez Pino, A. E., & Meza Meza, J. M. (2026). Interfacial characterization of fique fiber–reinforced polypropylene composites compatibilized with maleic anhydride–grafted polypropylene (MAPP). Science Progress, 109(4). https://doi.org/10.1177/00368504261507154
Vancouver
Cuellar Posada J, Palacio Betancur J, Sánchez Pino AE, Meza Meza JM. Interfacial characterization of fique fiber–reinforced polypropylene composites compatibilized with maleic anhydride–grafted polypropylene (MAPP). Science Progress. 2026;109(4). doi:10.1177/00368504261507154
BibTeX
@article{CuellarPosada2026,
author = {Cuellar Posada, Julio and Palacio Betancur, Juliana and Sánchez Pino, Astrid Elena and Meza Meza, Juan Manuel},
title = {Interfacial characterization of fique fiber–reinforced polypropylene composites compatibilized with maleic anhydride–grafted polypropylene (MAPP)},
journal = {Science Progress},
year = {2026},
volume = {109},
number = {4},
doi = {10.1177/00368504261507154}
}
EUVIMED