EUVIMEDOpdag EUVIMED
Crossref

Enhanced mechanical and tribological properties of 3D printed short carbon fiber reinforced polyether ether ketone composites

Xiancheng Lv, Shuyan Yang, Xianqiang Pei, Yaoming Zhang, Qihua Wang, Tingmei Wang

Polymer Composites · 2024-07-10 · 45 (10) · 8840-8860

DOI: 10.1002/pc.28380 ↗

At a glance

Journal article in Polymer Composites, published online on 2024-03-30. Written by Xiancheng Lv and 5 co-authors. Cited 31 times so far (Crossref); 49 references.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Material extrusion additive manufacturing provides an effective solution for fabrication of highly customized polyether ether ketone (PEEK) composite parts with any complex shape. Nevertheless, compared with conventional methods, the mechanical strength of 3D printed carbon fiber reinforced PEEK (CF/PEEK) composites is unsatisfactory due to the weak interface bonding strength and high voids content induced by the temperature difference. To overcome this challenge, a temperature‐control 3D printer was used to investigate the effects of ambient temperature and annealing temperature on the microstructure, crystallization behavior and mechanical properties of 3D printed parts. Moreover, the tribological properties of parts printed at different ambient temperature were also studied under various contact pressure. Experimental results showed that the ambient temperature and annealing treatment directly affected the interfacial bonding (fiber/matrix, filament/filament, layer/layer), crystallinity of printed samples, thus affecting their mechanical and tribological properties. The CF/PEEK parts printed at high ambient temperature of 200°C exhibited outstanding mechanical and tribological properties. This study has positive significance for promoting the application of 3D printed PEEK composites in the field of structural load‐bearing and friction materials. Highlights Structure–property relationships for 3D printed CF/PEEK composites. The ambient temperature strongly affects the thermal and microstructural properties Interaction between crystallization and molecular interface diffusion. Interfacial bonding and crystallinity determine the mechanical properties. Tribological properties are highly dependent on applied pressures.

Cite

APA

Lv, X., Yang, S., Pei, X., Zhang, Y., Wang, Q., & Wang, T. (2024). Enhanced mechanical and tribological properties of 3D printed short carbon fiber reinforced polyether ether ketone composites. Polymer Composites, 45(10), 8840-8860. https://doi.org/10.1002/pc.28380

Vancouver

Lv X, Yang S, Pei X, Zhang Y, Wang Q, Wang T. Enhanced mechanical and tribological properties of 3D printed short carbon fiber reinforced polyether ether ketone composites. Polymer Composites. 2024;45(10):8840-8860. doi:10.1002/pc.28380

BibTeX
@article{Lv2024,
  author = {Lv, Xiancheng and Yang, Shuyan and Pei, Xianqiang and Zhang, Yaoming and Wang, Qihua and Wang, Tingmei},
  title = {Enhanced mechanical and tribological properties of 3D printed short carbon fiber reinforced polyether ether ketone composites},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {10},
  pages = {8840--8860},
  doi = {10.1002/pc.28380}
}
Start for free →