EUVIMEDOpdag EUVIMED
Open access · CC BY-NC-ND 4.0

Mechanical performance of carbon fiber‐reinforced polymer cellular structures manufactured via fused filament fabrication

Mehmet Kepenekci, Bahar Gharehpapagh, Ulas Yaman, Sezer Özerinç

Polymer Composites · 2023-08 · 44 (8) · 4654-4668

DOI: 10.1002/pc.27429 ↗

At a glance

Journal article in Polymer Composites, published online on 2023-05-31. Written by Mehmet Kepenekci and 3 co-authors. Cited 16 times so far (Crossref); 55 references. The full text is freely available (open access, CC BY-NC-ND 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This article investigates the mechanical behavior of polyamide and carbon fiber‐reinforced (CFR) polyamide structures produced by Fused Filament Fabrication. CFR improves solid polyamide's tensile strength and modulus by more than 200% and 800%, respectively. The enhancement is highest in the parallel raster due to the alignment of the fibers in the printing direction. The compression tests of gyroid, honeycomb, and Voronoi cellular structures revealed the effect of geometry and fiber reinforcement on energy absorption performance. CFR gyroid infill offers the best performance with a specific energy absorption capacity reaching 10 kJ/kg and an efficiency close to 50%. Fiber reinforcement improves energy absorption by a factor of four or higher while increasing the weight by only 10%. The energy absorption capacity of the reinforced polyamide offers enormous potential for developing new lightweight load‐bearing and impact‐absorbing structures.

Cite

APA

Kepenekci, M., Gharehpapagh, B., Yaman, U., & Özerinç, S. (2023). Mechanical performance of carbon fiber‐reinforced polymer cellular structures manufactured via fused filament fabrication. Polymer Composites, 44(8), 4654-4668. https://doi.org/10.1002/pc.27429

Vancouver

Kepenekci M, Gharehpapagh B, Yaman U, Özerinç S. Mechanical performance of carbon fiber‐reinforced polymer cellular structures manufactured via fused filament fabrication. Polymer Composites. 2023;44(8):4654-4668. doi:10.1002/pc.27429

BibTeX
@article{Kepenekci2023,
  author = {Kepenekci, Mehmet and Gharehpapagh, Bahar and Yaman, Ulas and Özerinç, Sezer},
  title = {Mechanical performance of carbon fiber‐reinforced polymer cellular structures manufactured via fused filament fabrication},
  journal = {Polymer Composites},
  year = {2023},
  volume = {44},
  number = {8},
  pages = {4654--4668},
  doi = {10.1002/pc.27429}
}
Start for free →