EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

A Review of Print Heads for Fused Filament Fabrication of Continuous Carbon Fiber-Reinforced Composites

Heng Cai iD, Yuan Chen

Micromachines · 24.03.2024 · 15 (4) · 432

DOI: 10.3390/mi15040432 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 24.03.2024. Verfasst von Heng Cai und 1 weiteren Autor:innen. Beteiligte Einrichtung: Shenzhen Key Laboratory of Intelligent Manufacturing for Continuous Carbon Fiber Reinforced Composites, Southern University of Science and Technology…. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Postdoctoral Fellowship Program of CPSF (GZC20231037), the National Natural Science Foundation of China (12302177), the Guangdong University Key-Area Special P…, Postdoctoral Fellowship Program of CPSF, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The print head is one of the most critical components in an additive manufacturing (AM) system. It can significantly affect the quality of printed parts. Recently, because continuous carbon fiber-reinforced composites can have excellent mechanical properties, a relevant AM technique, fused filament fabrication (FFF), has been attracting increasing attention. This has extended the requirements demanded of print heads. To this end, different FFF extrusion methods have been rapidly developed based on various methods of impregnating fibers into the matrix for the corresponding print heads. Generally, these extrusion methods are of three types: single extrusion, in situ extrusion, and dual extrusion. All these methods face substantial challenges, such as the nozzle clogging and damage to the continuous carbon fibers during extrusion. These common issues still need to be fully addressed. This study’s aim is to summarize and discuss the different extrusion methods and their FFF specific components in terms of their advantages and disadvantages for continuous carbon fiber-reinforced composites.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingcontinuous carbon fiber-reinforced compositesextrusion methodfused filament fabricationprint head

Autor:innen und Institutionen

  • Shenzhen Key Laboratory of Intelligent Manufacturing for Continuous Carbon Fiber Reinforced Composites, Southern University of Science and Technology, Shenzhen 518055, China.
  • School of System Design and Intelligent Manufacturing (SDIM), Southern University of Science and Technology, Shenzhen 518055, China.

ORCID-Profile: Heng Cai

Förderung

  • Postdoctoral Fellowship Program of CPSF (GZC20231037), the National Natural Science Foundation of China (12302177), the Guangdong University Key-Area Special P…
  • Postdoctoral Fellowship Program of CPSF
  • National Natural Science Foundation of China
  • Guangdong University Key-Area Special Program, China
  • Shenzhen Key Laboratory of Intelligent Manufacturing for Continuous Carbon Fiber-Reinforced Composites, China
  • Shenzhen Science and Technology Program, China

Zitieren

APA

Cai, H., & Chen, Y. (2024). A Review of Print Heads for Fused Filament Fabrication of Continuous Carbon Fiber-Reinforced Composites. Micromachines, 15(4), 432. https://doi.org/10.3390/mi15040432

Vancouver

Cai H, Chen Y. A Review of Print Heads for Fused Filament Fabrication of Continuous Carbon Fiber-Reinforced Composites. Micromachines. 2024;15(4):432. doi:10.3390/mi15040432

BibTeX
@article{Cai2024,
  author = {Cai, Heng and Chen, Yuan},
  title = {A Review of Print Heads for Fused Filament Fabrication of Continuous Carbon Fiber-Reinforced Composites},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {4},
  pages = {432},
  doi = {10.3390/mi15040432}
}
Kostenlos starten →