EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Behavior Prediction of 3D ‐Printed PLA /Wood Composites Using Artificial Neural Network and Fuzzy Logic

Osman Ulkir, Gazi Akgun, Arif Karadag

Polymers for Advanced Technologies · 2025-02 · 36 (2)

DOI: 10.1002/pat.70103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers for Advanced Technologies, online erschienen am 10.02.2025. Verfasst von Osman Ulkir und 2 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a novel approach to optimize and predict the mechanical properties of 3D‐printed polylactic acid (PLA)/wood composites through artificial neural network (ANN) and fuzzy logic (FL) modeling. The research addresses the critical challenge of determining optimal process parameters in fused deposition modeling (FDM) of natural fiber composites. Using Taguchi's L27 orthogonal array, experiments were conducted with five key printing parameters: layer thickness (100–200–300 μm), printing speed (PS) (40–60–90 mm/s), raster angle (RA) (0°–45°–90°), infill density (ID) (30%–60%–90%), and nozzle temperature (NT) (190°C–200°C–210°C). Analysis revealed that RA and PS were the most influential parameters, contributing 41.86% and 40.92% to tensile and compressive strengths, respectively. The developed ANN model demonstrated exceptional prediction accuracy with R 2 values of 99.94% for both tensile and compressive strengths, surpassing the FL model's performance ( R 2 = 97.16%). The development of these models is crucial for accurately predicting mechanical behavior, allowing for efficient process optimization without extensive physical testing. Both methods demonstrated high prediction accuracy. Validation tests revealed that maximum errors of 1.95% and 2.81% for ANN and FL, respectively. The findings contribute valuable insights for the development of high‐performance natural fiber composites and establish a foundation for future advanced manufacturing processes.

Zitieren

APA

Ulkir, O., Akgun, G., & Karadag, A. (2025). Mechanical Behavior Prediction of 3D ‐Printed PLA /Wood Composites Using Artificial Neural Network and Fuzzy Logic. Polymers for Advanced Technologies, 36(2). https://doi.org/10.1002/pat.70103

Vancouver

Ulkir O, Akgun G, Karadag A. Mechanical Behavior Prediction of 3D ‐Printed PLA /Wood Composites Using Artificial Neural Network and Fuzzy Logic. Polymers for Advanced Technologies. 2025;36(2). doi:10.1002/pat.70103

BibTeX
@article{Ulkir2025,
  author = {Ulkir, Osman and Akgun, Gazi and Karadag, Arif},
  title = {Mechanical Behavior Prediction of 3D ‐Printed PLA /Wood Composites Using Artificial Neural Network and Fuzzy Logic},
  journal = {Polymers for Advanced Technologies},
  year = {2025},
  volume = {36},
  number = {2},
  doi = {10.1002/pat.70103}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche