EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Performance of 3D-Printed Carbon Fibre—PLA-PHA Composites

David Bassir iD, Sofiane Guessasma iD

Polymers · 23.03.2026 · 18 (6) · 771

DOI: 10.3390/polym18060771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.03.2026. Verfasst von David Bassir und 1 weiteren Autor:innen. Beteiligte Einrichtung: Smart Structural Health Monitoring and Control Laboratory, DGUT-CNAM, Dongguan University of Technology, D1, Daxue Rd., Songshan Lake, Dongguan 52380…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, French National Research Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research delves into the impact of varying printing angles in the range (0°, 15°, 30°, 45°) on the thermal and mechanical characteristics of carbon fibre–PLA/PHA composites fabricated via fused filament fabrication (FFF). The microstructural arrangement within the 3D-printed PLA/PHA is unveiled through the application of SEM, X-ray microtomography and optical imaging. Tensile loading conditions are employed to extract meaningful mechanical parameters such as Young’s modulus, tensile strength, elongation at break, and mechanical energy, all of which are associated with the printing angle settings. The results indicate that the filaments exhibit a porosity of approximately 3%, while the porosity of the printed structure ranges from 27% to 38%, depending on the printing angle. Tensile modulus in the range 840 to 890 MPa is found not to be highly sensitive to the printing angle. However, tensile strength reaches 37 MPa for a printing angle of 30°. The variations across conditions are limited to approximately 6% in tensile stiffness and 16% in tensile strength. Finite element simulations based on 3D imaging indicate that an effective modulus of the solid phase between 1.6 and 1.8 GPa provides the closest agreement between experimental measurements and numerical predictions. This study presents novel findings concerning the deformation mechanisms associated with different length scales, from filament composite to filament arrangement, in the carbon fibre–PLA/PHA composite. This study highlights that while printing angle has a moderate influence on mechanical response, the overall structural integrity and interlayer cohesion of carbon fibre–PLA/PHA composites remain robust across a wide range of processing parameters, demonstrating their potential for reliable structural applications in additive manufacturing.

Schlagwörter

Stichwörter der Autor:innen

carbon fibre–PLA/PHA compositefused deposition modellingmechanical propertiesmicrostructure

Autor:innen und Institutionen

  • Smart Structural Health Monitoring and Control Laboratory, DGUT-CNAM, Dongguan University of Technology, D1, Daxue Rd., Songshan Lake, Dongguan 523808, China.
  • ENS Paris-Saclay, University Paris-Saclay, Centre Borelli, UMR CNRS 9010, 91190 Gif-sur-Yvette, France.
  • INRAE, Research Unit BIA, de la Géraudière, F-44316 Nantes, France.

ORCID-Profile: David Bassir, Sofiane Guessasma

Förderung

  • Agence Nationale de la Recherche
  • French National Research Agency

Zitieren

APA

Bassir, D., & Guessasma, S. (2026). Microstructure and Mechanical Performance of 3D-Printed Carbon Fibre—PLA-PHA Composites. Polymers, 18(6), 771. https://doi.org/10.3390/polym18060771

Vancouver

Bassir D, Guessasma S. Microstructure and Mechanical Performance of 3D-Printed Carbon Fibre—PLA-PHA Composites. Polymers. 2026;18(6):771. doi:10.3390/polym18060771

BibTeX
@article{Bassir2026,
  author = {Bassir, David and Guessasma, Sofiane},
  title = {Microstructure and Mechanical Performance of 3D-Printed Carbon Fibre—PLA-PHA Composites},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {771},
  doi = {10.3390/polym18060771}
}
Kostenlos starten →