EUVIMEDObjevte EUVIMED
Crossref

Development and characterization of the first proton minibeam system for single‐gantry proton facility

Yuting Lin, Wangyao Li, Daniel Johnson, Yolanda Prezado, Gregory N Gan, Hao Gao

Medical Physics · 2024

DOI: 10.1002/mp.17074 ↗

At a glance

Journal article in Medical Physics, 2024. Written by Yuting Lin and 5 co-authors. Institution: Department of Radiation Oncology, University of Kansas Medical Center, Kansas City, Kansas, USA. Major MEDLINE topics: Proton Therapy, Equipment Design. Cited 21 times so far (Crossref); 37 references. Funded by: NIH HHS, National Institutes of Health.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Background

Minibeam represents a preclinical spatially fractionated radiotherapy modality with great translational potential. The advantage lies in its high therapeutic index (compared to GRID and LATTICE) and ability to treat at greater depth (compared to microbeam). Proton minibeam radiotherapy (pMBRT) is a synergy of proton and minibeam. While the single‐gantry proton facility has gained popularity due to its affordability and compact design, it often has limited beam time available for research purposes. Conversely, given the current requirement of pMBRT on specific minibeam hardware collimators, necessitates a reproducible and fast setup to minimize pMBRT treatment time and streamline the switching time between pMBRT and conventional treatment for clinically translation.

Purpose

The contribution of this work is the development and characterization of the first pMBRT system tailored for single‐gantry proton facility. The system allows for efficient and reproducible plug‐and‐play setup, achievable within minutes.

Methods

The single room pMBRT system is constructed based on IBA ProteusONE proton machine. The end of nozzle is attached with beam modifying accessories though an accessory drawer. A small snout is attached to the accessory drawer and used to hold apertures and range shifters. The minibeam aperture consists of two components: a fitting ring and an aperture body. Three minibeam apertures were manufactured. The first‐generation apertures underwent qualitatively analysis with film, and the second generation aperture underwent more comprehensive quantitative measurement. The reproducibility of the setup is accessed, and the film measurements are performed to characterize the pMBRT system in cross validation with Monte Carlo (MC) simulations.

Results

We presented initial results of large field pMBRT aperture and the film measurements indicates the effect of source‐to‐isocenter distance = 930 cm in Y proton scanning direction. Consistent with TOPAS MC simulation, the dose uniformity of pMBRT field

Subjects

MeSH terms (MEDLINE)

Proton TherapyEquipment DesignMonte Carlo MethodProtonsRadiotherapy Dosage

Author keywords

Monte Carlomini‐beam therapypencil beam scanning proton therapyproton dosimetryspatial fractionated radiation therapy

Substances

Protons

Authors and institutions

  • Department of Radiation Oncology, University of Kansas Medical Center, Kansas City, Kansas, USA.
  • Institut Curie, University PSL, CNRS UMR3347, INSERM U1021, Orsay, France.

Funding

  • NIH HHS
  • National Institutes of Health

Cite

APA

Lin, Y., Li, W., Johnson, D., Prezado, Y., Gan, G. N., & Gao, H. (2024). Development and characterization of the first proton minibeam system for single‐gantry proton facility. Medical Physics. https://doi.org/10.1002/mp.17074

Vancouver

Lin Y, Li W, Johnson D, Prezado Y, Gan GN, Gao H. Development and characterization of the first proton minibeam system for single‐gantry proton facility. Medical Physics. 2024. doi:10.1002/mp.17074

BibTeX
@article{Lin2024,
  author = {Lin, Yuting and Li, Wangyao and Johnson, Daniel and Prezado, Yolanda and Gan, Gregory N and Gao, Hao},
  title = {Development and characterization of the first proton minibeam system for single‐gantry proton facility},
  journal = {Medical Physics},
  year = {2024},
  doi = {10.1002/mp.17074}
}
Start for free →