EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Photoreactivity of Norrish Type Photoinitiators for 3D Laser Printing via First Principles Calculations

Anna Mauri iD, Pascal Kiefer iD, Wolfgang Wenzel iD, Mariana Kozlowska iD

Macromolecular Rapid Communications · 2025

DOI: 10.1002/marc.202500231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Anna Mauri und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Kaiserstraße 12, 76131, Karlsruhe, Germany. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Lasers, Cyclohexanones. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 103 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Carl-Zeiss-Stiftung.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the rapidly evolving field of 3D laser nanoprinting, achieving high resolution and high printing speed relies heavily on the effective use and design of sensitive photoinitiators. However, their photoreactivity is hitherto not well described. This study investigates the photochemical and photophysical characteristics of a high‐performing Norrish Type II photoinitiator (2 E ,6 E )‐2,6‐bis(4‐(dibutylamino)benzylidene)‐4‐methylcyclohexanone, known as BBK, as well as commonly employed Norrish Type I photoinitiators: Irgacure 651, Irgacure 369. Using quantum mechanical calculations, multiphoton absorption, the formation of the excited states, and the radical formation mechanisms most probably involved in the initiation of free radical polymerization are examined. Their relation to the observations during 3D printing experiments is discussed, aiming to uncover the molecular foundations behind varying performances of photoinitiators. Bond dissociation energies and energy barriers for bond cleavage of Irgacure photoinitiators are demonstrated to confirm radical formation in the lowest triplet state, whereas this pathway is shown to be less probable for BBK. The radical polymerization initiation upon absorption from the triplet manifold of BBK and reactions with pentaerythritol triacrylate (PETA) monomers are described. Deactivation pathway via reversible intersystem crossing, as well as the photoactivation characteristics, are compared with relation to the 7‐diethylamino‐3‐thenoylcoumarin (DETC) photoinitiator.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalLasersCyclohexanonesPhotochemical ProcessesPolymerizationMolecular StructureQuantum Theory

Stichwörter der Autor:innen

3D laser printingdensity functional theoryfree‐radical polymerizationphotoinitiatortwo‐photon polymerization

Substanzen

Cyclohexanones

Autor:innen und Institutionen

  • Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Kaiserstraße 12, 76131, Karlsruhe, Germany.
  • Institute of Applied Physics (APH), Karlsruhe Institute of Technology (KIT), Kaiserstraße 12, 76131, Karlsruhe, Germany.

ORCID-Profile: Anna Mauri, Pascal Kiefer, Wolfgang Wenzel, Mariana Kozlowska

Förderung

  • Deutsche Forschungsgemeinschaft
  • Carl-Zeiss-Stiftung

Zitieren

APA

Mauri, A., Kiefer, P., Wenzel, W., & Kozlowska, M. (2025). Photoreactivity of Norrish Type Photoinitiators for 3D Laser Printing via First Principles Calculations. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202500231

Vancouver

Mauri A, Kiefer P, Wenzel W, Kozlowska M. Photoreactivity of Norrish Type Photoinitiators for 3D Laser Printing via First Principles Calculations. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202500231

BibTeX
@article{Mauri2025,
  author = {Mauri, Anna and Kiefer, Pascal and Wenzel, Wolfgang and Kozlowska, Mariana},
  title = {Photoreactivity of Norrish Type Photoinitiators for 3D Laser Printing via First Principles Calculations},
  journal = {Macromolecular Rapid Communications},
  year = {2025},
  doi = {10.1002/marc.202500231}
}
Kostenlos starten →