EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

“Dissolve‐on‐Demand” 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels

Alexandra L Mutch iD, Yeasmin Nahar iD, Alex C Bissember iD, Nathaniel Corrigan iD, Cyrille Boyer iD, Xin Yi Oh iD, Vinh Xuan Truong iD, Stuart C Thickett iD

Macromolecular Rapid Communications · 2024

DOI: 10.1002/marc.202400268 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024. Verfasst von Alexandra L Mutch und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Natural Sciences (Chemistry), University of Tasmania, Hobart, Tasmania, 7005, Australia. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Polymerization, Methacrylates. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: ARC Future Fellowship, Australian Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solvent‐free photopolymerization of vinyl monomers to produce high modulus materials with applications in 3D printing and photoswitchable materials is demonstrated. Polymerizable eutectic (PE) mixtures are prepared by simply heating and stirring various molar ratios of N ‐isopropylacrylamide (NIPAM), acrylamide (AAm) and 2‐hydroxyethyl methacrylate (HEMA). The structural and thermal properties of the resulting mixtures are evaluated by 1D and 2D NMR spectroscopy as well as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). UV photocuring kinetics of the PE mixtures is evaluated via in situ photo‐DSC and photorheology measurements. The PE mixtures cure rapidly and display storage moduli that are orders of magnitude greater than equivalent copolymers cured in an aqueous medium. The versatility of these PE systems is demonstrated through the addition of a photoswitchable spiropyran acrylate monomer, as well as applying the PE formulation as a stereolithography (SLA)‐based 3D printing resin. Due to the hydrogen‐bonding network in PE systems, 3D printing of the eutectic resin is possible in the absence of crosslinkers. The addition of a RAFT agent to reduce average polymer chain length enables 3D printing of materials which retain their shape and can be dissolved on demand in appropriate solvents.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalPolymerizationMethacrylatesAcrylamidesPhotochemical ProcessesPolymersTemperatureGelsAcrylamideMolecular Structure

Stichwörter der Autor:innen

3D Printingdeep eutectic solventphotopolymerizationphotorheologypolymerizable eutecticstereolithography

Substanzen

Methacrylateshydroxyethyl methacrylateN-isopropylacrylamideAcrylamidesPolymersGelsAcrylamide

Autor:innen und Institutionen

  • School of Natural Sciences (Chemistry), University of Tasmania, Hobart, Tasmania, 7005, Australia.
  • Cluster for Advanced Macromolecular Design (CAMD) and Australian Centre for NanoMedicine (ACN), School of Chemical Engineering, University of New South Wales, Sydney, NSW 2052, Australia.
  • Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Jurong Island, Singapore, 627833.

ORCID-Profile: Alexandra L Mutch, Yeasmin Nahar, Alex C Bissember, Nathaniel Corrigan, Cyrille Boyer, Xin Yi Oh, Vinh Xuan Truong, Stuart C Thickett

Förderung

  • ARC Future Fellowship
  • Australian Research Council

Zitieren

APA

Mutch, A. L., Nahar, Y., Bissember, A. C., Corrigan, N., Boyer, C., Oh, X. Y., Truong, V. X., & Thickett, S. C. (2024). “Dissolve‐on‐Demand” 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400268

Vancouver

Mutch AL, Nahar Y, Bissember AC, Corrigan N, Boyer C, Oh XY, et al. “Dissolve‐on‐Demand” 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels. Macromolecular Rapid Communications. 2024. doi:10.1002/marc.202400268

BibTeX
@article{Mutch2024,
  author = {Mutch, Alexandra L and Nahar, Yeasmin and Bissember, Alex C and Corrigan, Nathaniel and Boyer, Cyrille and Oh, Xin Yi and Truong, Vinh Xuan and Thickett, Stuart C},
  title = {“Dissolve‐on‐Demand” 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels},
  journal = {Macromolecular Rapid Communications},
  year = {2024},
  doi = {10.1002/marc.202400268}
}
Kostenlos starten →