PCL/Chitosan/Bioglass Hybrid Composite Shape Memory Scaffolds With Accelerated Degradation and Enhanced Bioactivity
Macromolecular Materials and Engineering · 2026-06 · 311 (6)
DOI: 10.1002/mame.70250 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 02.06.2026. Verfasst von Damion T Dixon und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Texas A&M University, College Station, Texas, USA. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIAMS NIH HHS.
Abstract (Originalsprache)
“Self‐fitting” shape memory polymer (SMP) scaffolds based on cross‐linked poly(ε‐caprolactone)‐diacrylate (PCL‐DA) represent a promising regenerative strategy for treating irregular craniomaxillofacial bone defects. Beyond conformal fitting, such scaffolds should exhibit intrinsic bioactivity as well as controlled and robust degradation rates. In prior reports, chitosan (CS) and 45S5 Bioglass (BG) were separately incorporated to form SMP scaffolds. “CS‐only” hybrid scaffolds suppressed fungal biofilm formation and accelerated degradation, whereas “BG‐only” composite scaffolds induced hydroxyapatite (HAp) mineralization and also accelerated degradation. Herein, “hybrid composite” scaffolds incorporating both CS and BG were developed. Semi‐interpenetrating networks were fabricated using PCL‐DA and CS‐ graft ‐PCL at 90:10 and 75:25 wt% ratios, corresponding to 1 and 2.5 wt% CS, respectively. BG was introduced at 5 and 10 wt%, and localized on the pore walls. These scaffolds retained excellent shape memory behavior despite a reduction in PCL crystallinity. Degradation was faster versus corresponding BG‐only and CS‐only scaffolds, and robust HAp mineralization was observed after just 1 day in 1X simulated body fluid. The hybrid composite scaffolds were mechanically robust, and HAp mineralization induced a substantial increase in modulus.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomedical Engineering, Texas A&M University, College Station, Texas, USA.
- Department of Materials Science and Engineering, Texas A&M University, College Station, Texas, USA.
- Department of Chemistry, Texas A&M University, College Station, Texas, USA.
Förderung
- NIAMS NIH HHS
Zitieren
APA
Dixon, D. T., Kanu, D. K., & Grunlan, M. A. (2026). PCL/Chitosan/Bioglass Hybrid Composite Shape Memory Scaffolds With Accelerated Degradation and Enhanced Bioactivity. Macromolecular Materials and Engineering, 311(6). https://doi.org/10.1002/mame.70250
Vancouver
Dixon DT, Kanu DK, Grunlan MA. PCL/Chitosan/Bioglass Hybrid Composite Shape Memory Scaffolds With Accelerated Degradation and Enhanced Bioactivity. Macromolecular Materials and Engineering. 2026;311(6). doi:10.1002/mame.70250
BibTeX
@article{Dixon2026,
author = {Dixon, Damion T and Kanu, Darian K and Grunlan, Melissa A},
title = {PCL/Chitosan/Bioglass Hybrid Composite Shape Memory Scaffolds With Accelerated Degradation and Enhanced Bioactivity},
journal = {Macromolecular Materials and Engineering},
year = {2026},
volume = {311},
number = {6},
doi = {10.1002/mame.70250}
}
EUVIMED