EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Shape Memory Polymer Bioglass Composite Scaffolds Designed to Heal Complex Bone Defects

Brandon M Nitschke, Elizabeth A Butchko, MaryGrace N Wahby, Kaylee M Breining, Alexander E Konz, Melissa A Grunlan iD

ACS Biomaterials Science & Engineering · 14.10.2024 · 10 (10) · 6509-6519

DOI: 10.1021/acsbiomaterials.4c01073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, online erschienen am 04.10.2024. Verfasst von Brandon M Nitschke und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Texas A&M University, College Station, Texas 77843, United States. Hauptthemen laut MEDLINE: Tissue Scaffolds, Polyesters, Ceramics. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIAMS NIH HHS, Texas A and M University, Texas A and M Engineering Experiment Station, Texas A and M University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An off-the-shelf scaffold with requisite properties could enable the viable treatment of irregular craniomaxillofacial bone defects. Notably, the scaffold should be conformally fitting, innately bioactive, and bioresorbable. In prior work, we developed a series of shape memory polymer (SMP) scaffolds based on cross-linked poly(ε-caprolactone) (PCL). These were capable of "self-fitting" into complex bone defects when exposed to temperatures above the melt transition of the constituent PCL, either linear-PCL-diacrylate (linear-PCL-DA, Tm ∼55 °C) or star-PCL-tetraacrylate (star-PCL-TA, Tm ∼45 °C) for the potential to improve tissue safety. To achieve favorably increased degradation rates versus PCL-only scaffolds, semi-interpenetrating networks (semi-IPNs) were formed by including linear- or star-poly(l-lactic acid) (PLLA). A potential limitation of these self-fitting scaffolds is the lack of bioactivity, which is essential to osteoinductivity and osseointegration. Herein, analogous composite scaffolds were formed with 45S5 bioglass (BG) to impart bioactivity. The solvent-cast particulate leaching fabrication method was adapted to introduce BG to the fused salt template, resulting in composites with BG concentrated on the pore wall surfaces rather than within pore struts. Composite scaffolds with good pore wall integrity were produced with 2.5, 5, and 10 wt % BG. All composite scaffolds exhibited non-brittle behavior and did not fracture with 85% strain. For semi-IPN composite scaffolds, PLLA crystallinity was lost, and mechanical properties were not appreciably altered versus the non-BG controls. Sufficient retention of PCL crystallinity led to excellent shape memory behavior. The inclusion of 5 and 10 wt % BG led to hydroxyapatite mineralization after 1 day of exposure to simulated body fluid, as well as increased rates of in vitro degradation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsPolyestersCeramicsBone RegenerationMaterials TestingBone and BonesTissue EngineeringSmart MaterialsBiocompatible MaterialsAnimalsHumansPolymers

Stichwörter der Autor:innen

bioactivitybioceramicbioglassbone regenerationcompositepolymerscaffold

Substanzen

PolyesterspolycaprolactoneBioglasspoly(lactide)Smart MaterialsBiocompatible MaterialsPolymers

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Texas A&M University, College Station, Texas 77843, United States.
  • Department of Materials Science and Engineering, Texas A&M University, College Station, Texas 77843, United States.
  • Department of Chemistry, Texas A&M University, College Station, Texas 77843, United States.

ORCID-Profile: Melissa A Grunlan

Förderung

  • NIAMS NIH HHS
  • Texas A and M University
  • Texas A and M Engineering Experiment Station, Texas A and M University
  • National Institute of Arthritis and Musculoskeletal and Skin Diseases

Zitieren

APA

Nitschke, B. M., Butchko, E. A., Wahby, M. N., Breining, K. M., Konz, A. E., & Grunlan, M. A. (2024). Shape Memory Polymer Bioglass Composite Scaffolds Designed to Heal Complex Bone Defects. ACS Biomaterials Science & Engineering, 10(10), 6509-6519. https://doi.org/10.1021/acsbiomaterials.4c01073

Vancouver

Nitschke BM, Butchko EA, Wahby MN, Breining KM, Konz AE, Grunlan MA. Shape Memory Polymer Bioglass Composite Scaffolds Designed to Heal Complex Bone Defects. ACS Biomaterials Science & Engineering. 2024;10(10):6509-6519. doi:10.1021/acsbiomaterials.4c01073

BibTeX
@article{Nitschke2024,
  author = {Nitschke, Brandon M and Butchko, Elizabeth A and Wahby, MaryGrace N and Breining, Kaylee M and Konz, Alexander E and Grunlan, Melissa A},
  title = {Shape Memory Polymer Bioglass Composite Scaffolds Designed to Heal Complex Bone Defects},
  journal = {ACS Biomaterials Science & Engineering},
  year = {2024},
  volume = {10},
  number = {10},
  pages = {6509--6519},
  doi = {10.1021/acsbiomaterials.4c01073}
}
Kostenlos starten →