Impact of E‐Beam Sterilization on Bioglass Composite Shape Memory Scaffolds
Macromolecular Materials and Engineering · 2026-03 · 311 (3)
DOI: 10.1002/mame.202500329 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 21.11.2025. Verfasst von Brandon M Nitschke und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Texas A&M University, College Station, Texas, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIAMS NIH HHS, National Institute of Arthritis and Musculoskeletal and Skin Diseases.
Abstract (Originalsprache)
A “self‐fitting” bioactive composite scaffold based on a shape memory polymer (SMP) and 45S5 Bioglass (BG) offers a promising regenerative treatment for irregularly shaped craniomaxillofacial (CMF) bone defects. Self‐fitting is afforded by scaffolds prepared as crosslinked networks from linear ‐poly(ε‐caprolactone)‐diacrylate ( linear ‐PCL‐DA), and as semi‐interpenetrating networks (semi‐IPNs) with the inclusion of thermoplastic linear ‐poly(L‐lactic acid) ( linear ‐PLLA) (75:25 wt.%). Composites may be formed by inclusion of bioactive BG (5 and 10 wt.%) to elicit hydroxyapatite (HAp) mineralization and to increase degradation rates. To advance their clinical translation, such scaffolds must be conducive to modern sterilization methods. Electron beam (E‐beam) sterilization is an attractive alternative to conventional methods (e.g., ethylene oxide). Herein, the effect of E‐beam sterilization (25 kGy) on SMP composite scaffolds and non‐composite controls was systematically assessed. Sterilized scaffolds largely preserved the PCL crosslinked network (i.e., similar sol contents) as well as pore features. The compressive mechanical behavior of sterilized scaffolds was also largely maintained. E‐beam sterilization caused minor changes in PCL crystallinity, but excellent shape memory behavior was retained. In vitro degradation was somewhat faster following sterilization for scaffolds containing 10 wt.% BG. All E‐beam sterilized composite scaffolds retained bioactivity, exhibiting HAp mineralization with exposure to simulated body fluid (SBF, 1X).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomedical Engineering, Texas A&M University, College Station, Texas, USA.
- Department of Materials Science and Engineering, Texas A&M University, College Station, Texas, USA.
- Department of Chemistry, Texas A&M University, College Station, Texas, USA.
Förderung
- NIAMS NIH HHS
- National Institute of Arthritis and Musculoskeletal and Skin Diseases
Zitieren
APA
Nitschke, B. M., Wahby, M. N., & Grunlan, M. A. (2026). Impact of E‐Beam Sterilization on Bioglass Composite Shape Memory Scaffolds. Macromolecular Materials and Engineering, 311(3). https://doi.org/10.1002/mame.202500329
Vancouver
Nitschke BM, Wahby MN, Grunlan MA. Impact of E‐Beam Sterilization on Bioglass Composite Shape Memory Scaffolds. Macromolecular Materials and Engineering. 2026;311(3). doi:10.1002/mame.202500329
BibTeX
@article{Nitschke2026,
author = {Nitschke, Brandon M and Wahby, MaryGrace N and Grunlan, Melissa A},
title = {Impact of E‐Beam Sterilization on Bioglass Composite Shape Memory Scaffolds},
journal = {Macromolecular Materials and Engineering},
year = {2026},
volume = {311},
number = {3},
doi = {10.1002/mame.202500329}
}
EUVIMED