EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Recycling of Biochar‐Filled Poly(lactic acid): A Study of Mechanical and Thermal Properties Supported by Meta‐Analysis

Ábris Dávid Virág, Kerstin Müller, Ana Ramos‐Masana, Csenge Tóth

Macromolecular Materials and Engineering · 2026-05 · 311 (5)

DOI: 10.1002/mame.70234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 18.05.2026. Verfasst von Ábris Dávid Virág und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research, Development and Innovation Office.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent life cycle assessments show that poly(lactic acid) (PLA) should be mechanically recycled as it conserves energy, retains material value, and supports a circular economy more effectively than composting or chemical recycling. Fillers can reduce recycling‐induced deterioration of mechanical properties. Among them, biochar, a renewable additive, has attracted growing interest. In this study, we investigated the effect of biochar and repeated mechanical recycling on the structural, thermal, and mechanical properties of injection‐molded PLA. To this end, PLA composites with 5 wt.% biochar were subjected to 0, 1, and 5 reprocessing cycles. Rheological results indicate that each processing step decreased the weight‐average molecular weight of PLA by approximately 9%. 5 reprocessing cycles caused a significant decrease in tensile strength and strain at break, while a single recycling step had no adverse effect. Our meta‐analysis of the literature confirmed that biochar generally causes only minor changes in the tensile properties of PLA (median: Δσ ≈ −2.9%, ΔE ≈+9.7%, Δε ≈−16.7%). Neither the addition of biochar nor recycling affected its glass transition or melting temperatures. Overall, the results indicate that mechanical recycling is feasible as an end‐of‐life solution for PLA with biochar as a filler, but only with a limited number of recycling cycles.

Förderung

  • National Research, Development and Innovation Office

Zitieren

APA

Virág, Á. D., Müller, K., Ramos‐Masana, A., & Tóth, C. (2026). Mechanical Recycling of Biochar‐Filled Poly(lactic acid): A Study of Mechanical and Thermal Properties Supported by Meta‐Analysis. Macromolecular Materials and Engineering, 311(5). https://doi.org/10.1002/mame.70234

Vancouver

Virág ÁD, Müller K, Ramos‐Masana A, Tóth C. Mechanical Recycling of Biochar‐Filled Poly(lactic acid): A Study of Mechanical and Thermal Properties Supported by Meta‐Analysis. Macromolecular Materials and Engineering. 2026;311(5). doi:10.1002/mame.70234

BibTeX
@article{Virg2026,
  author = {Virág, Ábris Dávid and Müller, Kerstin and Ramos‐Masana, Ana and Tóth, Csenge},
  title = {Mechanical Recycling of Biochar‐Filled Poly(lactic acid): A Study of Mechanical and Thermal Properties Supported by Meta‐Analysis},
  journal = {Macromolecular Materials and Engineering},
  year = {2026},
  volume = {311},
  number = {5},
  doi = {10.1002/mame.70234}
}
Kostenlos starten →