EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Plasticization/Annealing on Thermal, Dynamic Mechanical, and Rheological Properties of Poly(Lactic Acid)

Lina Benkraled iD, Assia Zennaki iD, Latifa Zair, Khadidja Arabeche, Abdelkader Berrayah, Ana Barrera iD, Zohra Bouberka, Ulrich Maschke iD

Polymers · 03.04.2024 · 16 (7) · 974

DOI: 10.3390/polym16070974 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 03.04.2024. Verfasst von Lina Benkraled und 7 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire de Recherche sur les Macromolécules (LRM), Faculté des Sciences, Université Abou Bekr Belkaïd, BP 119, Tlemcen 13000, Algeria. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the use of low molecular weight poly(ethylene glycol) (PEG) as a plasticizer for poly(lactic acid) (PLA). PLA/PEG blend films were prepared using the solvent casting method with varying mixing ratios. The films were analyzed using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and dynamic rheological analysis. The results indicate that the addition of PEG as a plasticizer affects the thermal and mechanical properties of the PLA/PEG blend films. The study found that the glass transition and cold crystallization temperatures decreased with increasing PEG content up to 20 wt%, while the crystallinity and crystallization rate increased. The blends with up to 20 wt% PEG were miscible, but phase separation occurred when the plasticizer content was increased to 30 wt%. Subsequently, amorphous samples of neat PLA and PLA plasticized with 10 wt% of PEG underwent annealing at various temperatures (Ta = 80–120 °C) for durations ta of 1 and 24 h. The samples were then analyzed using DSC and DMA. The addition of PEG to PLA altered the content of α′ and α crystalline forms compared to neat PLA at a given (Ta; ta) and favored the formation of a mixture of α′ and α crystals. The crystallinity achieved upon annealing increased with increasing Ta or ta and with the incorporation of PEG.

Schlagwörter

Stichwörter der Autor:innen

annealingcrystallinityplasticizationpoly(ethylene glycol)poly(lactic acid)

Autor:innen und Institutionen

  • Laboratoire de Recherche sur les Macromolécules (LRM), Faculté des Sciences, Université Abou Bekr Belkaïd, BP 119, Tlemcen 13000, Algeria.
  • Unité Matériaux et Transformations (UMET), UMR 8207, Université de Lille, CNRS, INRAE, Centrale Lille, 59000 Lille, France.
  • Laboratoire Physico-Chimique des Matériaux, Catalyse et Environnement (LPCMCE), Université des Sciences et de la Technologie Mohammed Boudiaf d'Oran (USTO-MB), Oran 31000, Algeria.

ORCID-Profile: Lina Benkraled, Assia Zennaki, Ana Barrera, Ulrich Maschke

Zitieren

APA

Benkraled, L., Zennaki, A., Zair, L., Arabeche, K., Berrayah, A., Barrera, A., Bouberka, Z., & Maschke, U. (2024). Effect of Plasticization/Annealing on Thermal, Dynamic Mechanical, and Rheological Properties of Poly(Lactic Acid). Polymers, 16(7), 974. https://doi.org/10.3390/polym16070974

Vancouver

Benkraled L, Zennaki A, Zair L, Arabeche K, Berrayah A, Barrera A, et al. Effect of Plasticization/Annealing on Thermal, Dynamic Mechanical, and Rheological Properties of Poly(Lactic Acid). Polymers. 2024;16(7):974. doi:10.3390/polym16070974

BibTeX
@article{Benkraled2024,
  author = {Benkraled, Lina and Zennaki, Assia and Zair, Latifa and Arabeche, Khadidja and Berrayah, Abdelkader and Barrera, Ana and Bouberka, Zohra and Maschke, Ulrich},
  title = {Effect of Plasticization/Annealing on Thermal, Dynamic Mechanical, and Rheological Properties of Poly(Lactic Acid)},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {7},
  pages = {974},
  doi = {10.3390/polym16070974}
}
Kostenlos starten →