EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Evaluation of cutting efficiency and thermal damage during soft tissue surgery with 940 nm‐diode laser: An ex vivo study

Dimitrios Strakas, Dimitrios Dionysopoulos iD, Kosmas Tolidis, Jörg Meister iD

Lasers in Surgery and Medicine · 2023-03 · 55 (3) · 294-304

DOI: 10.1002/lsm.23639 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lasers in Surgery and Medicine, online erschienen am 05.02.2023. Verfasst von Dimitrios Strakas und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Operative Dentistry, Faculty of Dentistry, School of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece. Hauptthemen laut MEDLINE: Laser Therapy. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To investigate quantitatively the cutting efficiency and the thermal effects in the surrounding soft tissues of incisions that are induced by a 940 nm‐diode laser with different power settings. Materials and Methods Fifty‐four gingival samples were prepared from the lower jaws of freshly slaughtered German‐land race pigs and were randomly divided into 9 groups ( n = 6) according to the adjusted output power (1, 1.5, 2, 2.5, 3, 3.5, 4, 5 and 6 W). Five incisions were implemented for each sample using a diode laser (940 nm) in continuous wave with an initiated tip resulting in 30 incisions for each experimental group utilizing a three‐dimensional computer‐controlled micropositioner. The samples were prepared for histometric evaluation using a transmitted light microscope. The cutting depth and width and the thermal damage were recorded for each sample and the efficiency factor γ was calculated.

Results

The highest cutting efficiency ( γ z = 0.81 ± 0.03) exhibited the group with 5 W output power ( p < 0.05), while the lowest ( γ z = 0.45 ± 0.11) showed the 1‐W group ( p < 0.05). Over 3.5 W there was a rapid increase in the size of thermal damage of the incisions, especially for 6 W, which presented the largest.

Conclusions

The most effective power parameters of diode laser (940 nm) for soft tissue surgery were from 3 to 5 W. The outcomes of the current study may help to establish clinical protocols for the use of diode lasers (940 nm) in soft tissue surgery in contact mode assisting dental professionals to achieve optimal clinical results and avoid complications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Laser TherapyAnimalsGingivaLasers, SemiconductorSwine

Stichwörter der Autor:innen

cutting depthdiode laserefficiency factorgingival tissuesoutput powerthermal damage

Autor:innen und Institutionen

  • Department of Operative Dentistry, Faculty of Dentistry, School of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece.
  • Center of Dento-Maxilo-Facial Medicine, Center of Applied Medical Laser Research and Biomedical Optics (AMLaReBO), Bonn University, Bonn, Germany.

ORCID-Profile: Dimitrios Dionysopoulos, Jörg Meister

Zitieren

APA

Strakas, D., Dionysopoulos, D., Tolidis, K., & Meister, J. (2023). Evaluation of cutting efficiency and thermal damage during soft tissue surgery with 940 nm‐diode laser: An ex vivo study. Lasers in Surgery and Medicine, 55(3), 294-304. https://doi.org/10.1002/lsm.23639

Vancouver

Strakas D, Dionysopoulos D, Tolidis K, Meister J. Evaluation of cutting efficiency and thermal damage during soft tissue surgery with 940 nm‐diode laser: An ex vivo study. Lasers in Surgery and Medicine. 2023;55(3):294-304. doi:10.1002/lsm.23639

BibTeX
@article{Strakas2023,
  author = {Strakas, Dimitrios and Dionysopoulos, Dimitrios and Tolidis, Kosmas and Meister, Jörg},
  title = {Evaluation of cutting efficiency and thermal damage during soft tissue surgery with 940 nm‐diode laser: An ex vivo study},
  journal = {Lasers in Surgery and Medicine},
  year = {2023},
  volume = {55},
  number = {3},
  pages = {294--304},
  doi = {10.1002/lsm.23639}
}
Kostenlos starten →