EUVIMEDEUVIMED entdecken
EvaluationsstudieOpen Access · CC BY-NC 4.0

Evaluation of the Baseplate Position and Screws in Reverse Total Shoulder Arthroplasty Using 3D Printed Patient‐Specific Instrumentation

Wonhee Lee iD, Woojin Yu, HwaYong Lee, Guk Bae Kim, In-Ho Jeon, Kyoung Hwan Koh iD

Journal of Orthopaedic Research · 2025

DOI: 10.1002/jor.70023 ↗

Kurz gefasst

Evaluationsstudie in der Zeitschrift Journal of Orthopaedic Research, 2025. Verfasst von Wonhee Lee und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Republic of Korea. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Arthroplasty, Replacement, Shoulder, Bone Screws, Shoulder Joint. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Patient‐specific instrumentation (PSI) in shoulder arthroplasty has been used to translate preoperative surgical planning into precise implant positioning. However, screws for baseplate fixation using PSI have not been preoperatively planned or verified for proper location and length. This study aims to assess the reproducibility of the 3D‐printed PSI system for baseplate and screw positioning in reverse total shoulder arthroplasty (rTSA) and the role of preoperative screw planning. Postoperative CT data from 30 patients who underwent primary rTSA using PSI were collected. After ideal position planning of the baseplate and screws, a PSI guide was 3D‐printed. Postoperative CT evaluated baseplate version, inclination, and translation. Screw length, insertion angle, and potential penetration of the spinoglenoid and suprascapular notch were investigated. The mean differences between planned and actual implantation were 2.7° ± 5.8° for version, 0.9° ± 3.5° for inclination, and 1.0° ± 5.4° for rotation. The mean translation difference was 1.7 ± 1.0 mm. The mean screw angulation differences were −0.5° ± 6.4° anteroposteriorly and −1.4° ± 7.1° superior‐inferiorly. There was no risk of nerve injury from suprascapular notch involvement because it was considered that the screw was positioned away from the nerve path. The posterior screw was abandoned in 93.3% of patients due to proximity to the suprascapular nerve or insufficient length for bone purchase (mean length: 9.3 ± 2.0 mm). Using PSI, the reproducibility of baseplate and screw placement in rTSA was confirmed. The posterior screw has a limited role due to its length and direction constraints. Clinical significance Preoperative planning and PSI enable precise surgery, including proper screw insertion and baseplate positioning.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalArthroplasty, Replacement, ShoulderBone ScrewsShoulder JointHumansMaleFemaleAgedMiddle AgedAged, 80 and overTomography, X-Ray ComputedReproducibility of Results

Stichwörter der Autor:innen

3D printingbaseplate and screw positionpatient‐specific instrumentationpreoperative planningreverse total shoulder arthroplasty

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Republic of Korea.
  • Department of Orthopedic Surgery, College of Medicine, University of Ulsan, Asan Medical Center, Seoul, Republic of Korea.
  • Anymedi Inc., Seoul, Republic of Korea.

ORCID-Profile: Wonhee Lee, Kyoung Hwan Koh

Zitieren

APA

Lee, W., Yu, W., Lee, H., Kim, G. B., Jeon, I. H., & Koh, K. H. (2025). Evaluation of the Baseplate Position and Screws in Reverse Total Shoulder Arthroplasty Using 3D Printed Patient‐Specific Instrumentation. Journal of Orthopaedic Research. https://doi.org/10.1002/jor.70023

Vancouver

Lee W, Yu W, Lee H, Kim GB, Jeon IH, Koh KH. Evaluation of the Baseplate Position and Screws in Reverse Total Shoulder Arthroplasty Using 3D Printed Patient‐Specific Instrumentation. Journal of Orthopaedic Research. 2025. doi:10.1002/jor.70023

BibTeX
@article{Lee2025,
  author = {Lee, Wonhee and Yu, Woojin and Lee, HwaYong and Kim, Guk Bae and Jeon, In-Ho and Koh, Kyoung Hwan},
  title = {Evaluation of the Baseplate Position and Screws in Reverse Total Shoulder Arthroplasty Using 3D Printed Patient‐Specific Instrumentation},
  journal = {Journal of Orthopaedic Research},
  year = {2025},
  doi = {10.1002/jor.70023}
}
Kostenlos starten →