EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stem size and stem alignment affects periprosthetic fracture risk and primary stability in cementless total hip arthroplasty

Tobias Konow iD, Katja Glismann, Frank Lampe, Benjamin Ondruschka, Michael M Morlock, Gerd Huber

Journal of Orthopaedic Research · 2024-04 · 42 (4) · 829-836

DOI: 10.1002/jor.25729 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Orthopaedic Research, online erschienen am 27.11.2023. Verfasst von Tobias Konow und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Biomechanics, TUHH Hamburg University of Technology, Hamburg, Germany. Hauptthemen laut MEDLINE: Arthroplasty, Replacement, Hip, Periprosthetic Fractures, Hip Prosthesis. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DePuy Synthes.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The ideal stem size and stem position is important for the success of total hip arthroplasty, since it can affect early implant loosening and periprosthetic fractures (PPF). This study aimed to investigate how small deviations from the ideal stem size and position influences the PPF risk and primary stability. Six experienced surgeons performed preoperative templating based on which the benchmark size for each femur was determined. Consecutive implantations were performed in six cadaveric femur pairs—one side was implanted with an undersized stem followed by the benchmark size and the contralateral side with a benchmark size followed by an oversized stem (Corail, Depuy Synthes). Moreover, three different alignments (six varus, six neutral, six valgus‐undersized) were compared using 18 femurs. Cortical strains during broaching and implantation were measured, and laser scans were used to determine final stem position. All specimens underwent dynamic loading. Primary stability was estimated from stem subsidence and pull‐out forces. Templated stem size varied between surgeons (±1 size; p = 0.005). Undersizing increased stem subsidence by 320% ( p < 0.001). Oversized stems exhibited 52% higher pull‐out forces ( p = 0.001) and 240% higher cortical strains ( p = 0.056). Cortex strains increased with varus alignment ( R 2 = 0.356, p = 0.011) while primary stability decreased with valgus stem alignment ( p = 0.043). Surgeons should be aware that small deviations from the ideal stem size and malalignments of the stem can significantly alter the mechanical situation and affect the success of their surgery.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Arthroplasty, Replacement, HipPeriprosthetic FracturesHip ProsthesisHumansProsthesis DesignFemurRetrospective Studies

Stichwörter der Autor:innen

periprosthetic fracturepreoperative planningprimary stabilitystem alignmentstem size

Autor:innen und Institutionen

  • Institute of Biomechanics, TUHH Hamburg University of Technology, Hamburg, Germany.
  • Asklepios Klinik Barmbek, Hamburg, Germany.
  • University Medical Center Hamburg-Eppendorf, Institute of Legal Medicine, Hamburg, Germany.

ORCID-Profile: Tobias Konow

Förderung

  • DePuy Synthes

Zitieren

APA

Konow, T., Glismann, K., Lampe, F., Ondruschka, B., Morlock, M. M., & Huber, G. (2024). Stem size and stem alignment affects periprosthetic fracture risk and primary stability in cementless total hip arthroplasty. Journal of Orthopaedic Research, 42(4), 829-836. https://doi.org/10.1002/jor.25729

Vancouver

Konow T, Glismann K, Lampe F, Ondruschka B, Morlock MM, Huber G. Stem size and stem alignment affects periprosthetic fracture risk and primary stability in cementless total hip arthroplasty. Journal of Orthopaedic Research. 2024;42(4):829-836. doi:10.1002/jor.25729

BibTeX
@article{Konow2024,
  author = {Konow, Tobias and Glismann, Katja and Lampe, Frank and Ondruschka, Benjamin and Morlock, Michael M and Huber, Gerd},
  title = {Stem size and stem alignment affects periprosthetic fracture risk and primary stability in cementless total hip arthroplasty},
  journal = {Journal of Orthopaedic Research},
  year = {2024},
  volume = {42},
  number = {4},
  pages = {829--836},
  doi = {10.1002/jor.25729}
}
Kostenlos starten →