Droplet Transfer Characteristics of Aluminum Alloy Double‐Wire Variable‐Polarity Single‐ and Double‐Pulsed Gas Metal Arc Welding
Journal of Manufacturing Science and Engineering · 29.10.2026
DOI: 10.1002/jmse.70003 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 29.10.2026. Verfasst von Kaiyuan Wu und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Basic and Applied Basic Research Foundation of Guangdong Province, Guangxi Key Research and Development Program.
Abstract (Originalsprache)
The aluminum (Al) alloy double‐wire variable‐polarity double‐pulsed gas metal arc welding (DW‐VP‐DP‐GMAW) process integrates the advantages of VP and DP welding based on the DW‐GMAW process, thereby increasing the welding deposition rate and efficiency while controlling the heat input. Droplet transfer is a critical process that determines the weld formation quality. To elucidate the influences of the electrode negative (EN) ratio and DP on droplet transfer, a droplet force model was established based on the static force balance model (SFBM). The droplet transfer process was observed using high‐speed photography, and characteristic parameters, including droplet detachment time, transfer time, droplet size, and the probability of two droplets per pulse (TDPP), were systematically analyzed. The results showed that the introduction of direct current electrode negative (DCEN) polarity could eliminate explosive transfer and significantly reduce the probability of TDPP. With the increase in the EN ratio, the droplet diameter increased from 1.2 to 2.0 mm, the detachment time prolonged from 4 to 7 ms, and the transfer time increased from approximately 5 to 10.5 ms. DP reduced the amount of molten metal by decreasing the wire feed speed (15%–20% lower than that of a single pulse (SP)), which further optimized the stability of droplet transfer and reduced the probability of TDPP by more than 30%.
Förderung
- National Natural Science Foundation of China
- Basic and Applied Basic Research Foundation of Guangdong Province
- Guangxi Key Research and Development Program
- China Scholarship Council
Zitieren
APA
Wu, K., Chen, Y., Li, Z., Zhao, Y., Yang, H., & Hong, X. (2026). Droplet Transfer Characteristics of Aluminum Alloy Double‐Wire Variable‐Polarity Single‐ and Double‐Pulsed Gas Metal Arc Welding. Journal of Manufacturing Science and Engineering. https://doi.org/10.1002/jmse.70003
Vancouver
Wu K, Chen Y, Li Z, Zhao Y, Yang H, Hong X. Droplet Transfer Characteristics of Aluminum Alloy Double‐Wire Variable‐Polarity Single‐ and Double‐Pulsed Gas Metal Arc Welding. Journal of Manufacturing Science and Engineering. 2026. doi:10.1002/jmse.70003
BibTeX
@article{Wu2026,
author = {Wu, Kaiyuan and Chen, Yutao and Li, Zhenhao and Zhao, Yihui and Yang, Haoran and Hong, Xiaobin},
title = {Droplet Transfer Characteristics of Aluminum Alloy Double‐Wire Variable‐Polarity Single‐ and Double‐Pulsed Gas Metal Arc Welding},
journal = {Journal of Manufacturing Science and Engineering},
year = {2026},
doi = {10.1002/jmse.70003}
}
EUVIMED