EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Process, Microstructure, and Properties of Double-Wire Narrow-Gap Gas Metal Arc Welding Low-Alloy Steel

Ning Xiao iD, Haoyu Kong, Qingjie Sun, Ninshu Ma iD

Materials · 18.12.2024 · 17 (24) · 6183

DOI: 10.3390/ma17246183 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.12.2024. Verfasst von Ning Xiao und 3 weiteren Autor:innen. Beteiligte Einrichtung: METALLECO Inc., No. 3185 Dundas St. W, 2F, Oakville, ON L6M 4J4, Canada. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Narrow-gap arc welding is an efficient method that significantly enhances industrial production efficiency and reduces costs. This study investigates the application of low-alloy steel wire EG70-G in narrow-gap gas metal arc welding (GMAW) on thick plates. Experimental observations were made to examine the arc behavior, droplet transition behavior, and weld formation characteristics of double-wire welding under various process parameters. Additionally, the temperature field of the welding process was simulated using finite element software (ABAQUS 2020). Finally, the microstructure and microhardness of the fusion zone in a double-wire, single-pass filled joint under the different welding speeds were compared and analyzed. The results demonstrate that the use of double-wire GMAW in narrow-gap welding yielded positive outcomes. Optimal settings for wire feeding speed, welding speed, and double-wire lateral spacing significantly enhanced welding quality, effectively preventing side wall non-fusion and poor weld profiles in the welded joints. The microstructure of the fusion zone produced at a higher welding speed (11 mm/s) was finer, resulting in increased microhardness compared to welds obtained at a lower speed (8 mm/s). This is attributed to the shorter duration of the liquid molten pool and the faster cooling rate associated with higher welding speed. This research provides a reference for the practical application of double-wire narrow-gap gas metal arc welding technology.

Schlagwörter

Stichwörter der Autor:innen

double-wire narrow-gap weldingheat inputmicrohardnessmicrostructurenumerical simulationwelding parameters

Autor:innen und Institutionen

  • METALLECO Inc., No. 3185 Dundas St. W, 2F, Oakville, ON L6M 4J4, Canada.
  • Joining and Welding Research Institute, Osaka University, Osaka 567-0047, Japan.
  • STUAA Automation Co., Ltd., No. 1000 South Langyatai Road, Qingdao 266400, China.

ORCID-Profile: Ning Xiao, Ninshu Ma

Zitieren

APA

Xiao, N., Kong, H., Sun, Q., & Ma, N. (2024). Study of Process, Microstructure, and Properties of Double-Wire Narrow-Gap Gas Metal Arc Welding Low-Alloy Steel. Materials, 17(24), 6183. https://doi.org/10.3390/ma17246183

Vancouver

Xiao N, Kong H, Sun Q, Ma N. Study of Process, Microstructure, and Properties of Double-Wire Narrow-Gap Gas Metal Arc Welding Low-Alloy Steel. Materials. 2024;17(24):6183. doi:10.3390/ma17246183

BibTeX
@article{Xiao2024,
  author = {Xiao, Ning and Kong, Haoyu and Sun, Qingjie and Ma, Ninshu},
  title = {Study of Process, Microstructure, and Properties of Double-Wire Narrow-Gap Gas Metal Arc Welding Low-Alloy Steel},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6183},
  doi = {10.3390/ma17246183}
}
Kostenlos starten →