Research on Technology of 7075 Aluminum Alloy Processed by Variable Polarity TIG Additive Manufacturing Utilizing Nanoparticle-Reinforced Welding Wire with TiB2
Crystals · 25.02.2023 · 13 (3) · 399
DOI: 10.3390/cryst13030399 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 25.02.2023. Verfasst von Zhigang Shen und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Provincial Key Research and Development Program.
Abstract (Originalsprache)
TIG arc additive manufacturing experiments were performed utilizing TiB2 nanoparticle-reinforced toward to 7075 aluminum alloy welding wire, and the microstructure and mechanical properties corresponding to different locations of welding plate were investigated. At the top location of the deposited layer, the microstructure was characterized by fine dendrite induced by solidification, and equiaxed grain was predominant at the middle location. The grain size at the bottom location was obviously larger compared to the top and middle locations, and secondary-phase particles were homogeneously distributed at the grain boundary or inner grains. The mechanical properties at the top location of the deposited layer were most excellent compared to the middle and bottom locations, and the tensile properties and micro-hardness were decreased with the detected area varying from middle location to the bottom location. The excellent combination of fracture elongation and maximum of tensile strength corresponding to different locations on the deposited layer were determined to be 361.8 MPa with respect to the 7075 aluminum alloy welding wire, respectively, which was higher compared to the samples processed by general arc additive manufacturing process with tensile strength of (279.4 ± 5.3) MPa, indicating the TiB2 nano-sized particles possessed certain enhancing effects on the investigated 7075 aluminum alloy.
Förderung
- Shandong Provincial Key Research and Development Program
Zitieren
APA
Shen, Z., Wu, Z., Wang, T., Jia, T., & Liu, C. (2023). Research on Technology of 7075 Aluminum Alloy Processed by Variable Polarity TIG Additive Manufacturing Utilizing Nanoparticle-Reinforced Welding Wire with TiB2. Crystals, 13(3), 399. https://doi.org/10.3390/cryst13030399
Vancouver
Shen Z, Wu Z, Wang T, Jia T, Liu C. Research on Technology of 7075 Aluminum Alloy Processed by Variable Polarity TIG Additive Manufacturing Utilizing Nanoparticle-Reinforced Welding Wire with TiB2. Crystals. 2023;13(3):399. doi:10.3390/cryst13030399
BibTeX
@article{Shen2023,
author = {Shen, Zhigang and Wu, Zhisheng and Wang, Ting and Jia, Tuosheng and Liu, Cuirong},
title = {Research on Technology of 7075 Aluminum Alloy Processed by Variable Polarity TIG Additive Manufacturing Utilizing Nanoparticle-Reinforced Welding Wire with TiB2},
journal = {Crystals},
year = {2023},
volume = {13},
number = {3},
pages = {399},
doi = {10.3390/cryst13030399}
}
EUVIMED