3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration
Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2023-07 · 111 (7) · 1351-1364
DOI: 10.1002/jbm.b.35239 ↗At a glance
Journal article in Journal of Biomedical Materials Research Part B: Applied Biomaterials, published online on 2023-02-24. Written by Damion T Dixon and 1 co-authors. Institution: School of Environmental, Civil, Agricultural and Mechanical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA. Major MEDLINE topics: Tissue Scaffolds, Bone Regeneration. Cited 31 times so far (Crossref); 82 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: MTF Biologics.
Abstract (original language)
Various methods have been used to treat bone defects caused by genetic disorders, injury, or disease. Yet, there is still great need to develop alternative approaches to repair damaged bone tissue. Bones naturally exhibit piezoelectric potential, or the ability to convert mechanical stresses into electrical impulses. This phenomenon has been utilized clinically to enhance bone regeneration in conjunction with electrical stimulation (ES) therapies; however, oftentimes with critical‐sized bone defects, the bioelectric potential at the site of injury is compromised, resulting in less desirable outcomes. In the present study, the potential of a 3D‐printed conductive polymer blend to enhance bone formation through restoration of the bioelectrical microenvironment was evaluated. A commercially available 3D printer was used to create circular, thin‐film scaffolds consisting of either polylactide (PLA) or a conductive PLA (CPLA) composite. Preosteoblast cells were seeded onto the scaffolds and subjected to direct current ES via a purpose‐built cell culture chamber. It was found that CPLA scaffolds had no adverse effects on cell viability, proliferation or differentiation when compared with control scaffolds. The addition of ES, however, resulted in a significant increase in the expression of osteocalcin, a protein indicative of osteoblast maturation, after 14 days of culture. Furthermore, xylenol orange staining also showed the presence of increased mineralized calcium nodules in cultures undergoing stimulation. This study demonstrates the potential for low‐cost, conductive scaffolding materials to support cell viability and enhance in vitro mineralization in conjunction with ES.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- School of Environmental, Civil, Agricultural and Mechanical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA.
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA.
ORCID profiles: Damion T Dixon, Cheryl T Gomillion
Funding
- MTF Biologics
Cite
APA
Dixon, D. T., & Gomillion, C. T. (2023). 3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 111(7), 1351-1364. https://doi.org/10.1002/jbm.b.35239
Vancouver
Dixon DT, Gomillion CT. 3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2023;111(7):1351-1364. doi:10.1002/jbm.b.35239
BibTeX
@article{Dixon2023,
author = {Dixon, Damion T and Gomillion, Cheryl T},
title = {3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration},
journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
year = {2023},
volume = {111},
number = {7},
pages = {1351--1364},
doi = {10.1002/jbm.b.35239}
}
EUVIMED